Frymaster 8195991 operation manual Clean Filter Pan, Detachable Parts and Accessories

Page 35

4.Set the thermostat to 195ºF (91ºC) or program the computer for Boil-Out (see separate Frymas- ter Fryer Controllers User’s Manual) and simmer the solution for 1 hour.

WARNING

Never leave the fryer unattended during this process. If the solution overflows, press the ON/OFF switch to the OFF position immediately.

5.After the solution has simmered for 1 hour, press the ON/OFF switch to the OFF position and allow the solution to cool.

6.Drain the solution into a suitable container (NOT the built-in filtration system filter pan or the Shortening Disposal Unit) and thoroughly wipe the frypot with a clean towel.

7.Close the drain valve and fill the frypot with clean, cold water and drain into a suitable container (NOT the built-in filtration system filter pan or the Shortening Disposal Unit). Repeat the rinse process again, and then wipe frypot with a clean, dry towel.

DANGER

Ensure that the frypot is completely free of water before filling with cooking oil or shortening. When the oil or shortening is heated to cooking temperature, water in the frypot will cause splattering.

Clean Filter Pan, Detachable Parts and Accessories

As with the frypot, a deposit of carbonized oil will accumulate on the filter pan and detachable parts and accessories such as baskets, sediment trays, or fish plates.

Wipe the filter pan and all detachable parts and accessories with a clean cloth dampened with a detergent solution (or the parts can be run through a dishwasher). Rinse and thoroughly dry each part. DO NOT use steel wool or abrasive pads to clean these parts. The scratches that result from such scrubbing make subsequent cleanings more difficult.

WARNING

Use a commercial-grade cleaner formulated to effectively clean and sanitize food-contact surfaces. Read the directions for use and precautionary statements be- fore use. Particular attention must be paid to the concentration of cleaner and the length of time the cleaner remains on the food-contact surfaces.

5-2

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 8195991 Hour Service HotlineCanada Iii PRO H55 Series GAS Fryer Table of Contents This page Intentionally Left Blank Applicability and Validity Parts Ordering and Service InformationPRO H55 Series GAS Fryer General Information European Community CE Specific Information Safety InformationDefinitions Installation, Operating, and Service PersonnelEquipment Description What to do if your equipment arrives damaged Shipping Damage Claim ProcedureGeneral Installation Requirements PRO H55 Series GAS Fryer Installation InstructionsNational Code Requirements Caster/Leg Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes CE StandardPressure mbar CE Gas Conversion Kits for Units with Gas Valve Non-CE Gas Conversion KitsCE GAS Conversion Instructions This page Intentionally Left Blank Controller Operation and Programming PRO H55 Series GAS Fryer Operating InstructionsFor CE Fryers Lighting the FryerShutting the Fryer Down Boiling Out the FrypotThis page Intentionally Left Blank PRO H55 Series GAS Fryers Filtration Instructions Page Preparation for Use with Filter Paper or Filter Pad Use filter powder with the pad Preparation for Use with the Magnasol Filter AssemblyPage Snap the optional Power Shower into position Filter Pump Reset Switch Reassembly CleaningDraining and Disposing of Waste Oil Using the Optional Rear-Discharge Oil Disposal Clean Fryer Cabinet Inside and Out PRO H55 Series GAS Fryers Preventive MaintenanceFryer Preventive Maintenance Checks and Service Inspect Fryer and Accessories for DamageClean Filter Pan, Detachable Parts and Accessories Check Computer Magic III.5 Set Point Accuracy Authorized Service Center for assistanceClean Combustion Air Blower Assembly Quarterly Checks and ServiceLeft Viewing Port is Behind Motor Right Check Burner Manifold Pressure Clean Gas Valve Vent TubeFryer Built-In Filtration System Introduction PRO H55 Series GAS Fryers Operator TroubleshootingComputer or With alarmIndicator is on, but No display onSound when burners Heating indicatorRecovery is slow When cooking Fryer is operatingTroubleshooting Fryers with Solid State Analog Controller Normally. Blower Fryer is slow coming Out of melt cycle Heating mode lightHeating mode light Is on and blower is Will not ignite Heating mode lightFiltering Troubleshooting the Built-in Filtration SystemPump won’t start Pump stops duringOr the transfer is Power Shower is notPump starts, but no Transfer takes placeAnd/or noisy Troubleshooting the Basket LiftBasket lift Movement is jerkyService Hotline

8195991 specifications

The Frymaster 8195991 is a premium deep-fryer, designed specifically for commercial kitchens that require high performance and efficiency. This model is known for its robust construction and state-of-the-art technology, making it a favored choice among restaurateurs and chefs alike.

One of the most prominent features of the Frymaster 8195991 is its advanced fry control system. This technology ensures consistent frying results by automatically adjusting temperatures according to the type of food being fried. It helps maintain oil quality and enhances food flavor, crucial factors in any food establishment. Additionally, the fryer includes a built-in filtration system that prolongs oil life and reduces operational costs, ensuring that kitchens can maintain quality while saving money on oil purchases.

The Frymaster 8195991 boasts a digital display that simplifies the cooking process. With user-friendly controls, chefs can easily set cooking times and temperatures while monitoring frying progress in real-time. This feature is particularly useful during peak service hours, enabling kitchens to operate efficiently without sacrificing food quality. Safety is also a priority, and the fryer comes equipped with numerous safety features, including an automatic shut-off mechanism and temperature alarms to prevent overheating.

Another key characteristic of the Frymaster 8195991 is its sleek and compact design, which allows it to fit seamlessly into various kitchen layouts. Despite its smaller footprint, this fryer provides ample frying capacity, accommodating various food items such as French fries, chicken, and other fried delicacies. Its stainless steel construction ensures durability, while the easy-to-clean surfaces reduce maintenance time.

Moreover, the Frymaster 8195991 is designed with energy efficiency in mind. It utilizes innovative heating elements that minimize energy consumption without compromising on performance. This makes it an environmentally friendly choice for businesses looking to reduce their carbon footprint.

In conclusion, the Frymaster 8195991 is an exceptional deep-fryer tailored for commercial use, combining advanced technology and thoughtful engineering. With its digital controls, built-in filtration system, safety features, and energy efficiency, it stands out as a reliable and effective tool for any busy kitchen environment. Whether frying up appetizers or main dishes, the Frymaster 8195991 delivers consistent results, ensuring that culinary creations are not only delicious but also prepared with the utmost care and efficiency.
Top Page Image Contents