Jenn-Air JJW2830, JJW2527 manual Auto Convection Conversion, My Creations, To create a new setting

4.For cook timer, press the quickset pad next to Set Cook Timer. Enter a cooking length using the number keypad to set a timer to alert you when cooking ends. The time length may not exceed 12 hours. See the “Cook Timer” section for additional information. The oven will turn off when the cook time expires.

5.(Optional) To keep food warm after a programmed cooking cycle ends, select ON for Keep Warm when done. See the “Keep Warm™ Option” section for additional information.

6.(Optional) To set a delayed start, press the quickset pad next to Delay Start and set the desired time. See the “Delay Start” section for additional information.

7.Press START to begin cooking.

8.Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER on double oven models) to turn off the oven.

Auto Convection Conversion

Convection temperature and/or times can differ from those of standard cooking. When necessary, the oven automatically reduces standard recipe temperature and/or times.

1.From the Select Mode menu, touch the quickset pad next to Auto Convection Conversion.

2.Select a recipe conversion mode: Bake (casseroles, baked goods), Broil (steaks, fillets), Roast (meats, vegetables), Pastry (frozen pie, puff pastry).

NOTE: The temperature probe cannot be used during any auto convection conversion modes.

3.Enter standard cooking temperature. The temperature must be 170°F (77°C) or above and may not exceed 550°F (288°C). If a temperature outside of the available range is entered, the Start and Set Timer options will be unavailable.

4.The standard cooking temperature will be converted to a convection temperature if necessary.

5.Press START to begin, or select Set Timer to set a cook time.

6.For timer, enter the standard cooking time. The standard cooking time cannot exceed 12 hours.

7.The standard cooking time will be converted to a convection time if necessary.

NOTE: The converted cooking temperature and time may vary between modes. Each mode adjusts the appropriate temperature and time, when necessary.

8.Press START to begin preheating or cooking, or select Delay Start and set desired time. See the “Delay Start” section for additional information.

9.When the timer is set and time expires, you can select Exit Timer to add more time. The oven will turn off when the cook time expires.

My Creations

My Creations allows the customization of cooking processes. When My Creations is selected from the main menu, a list of previously created settings are presented along with the ability to create more.

To create a new setting:

1.From the Select Mode menu, touch the MORE button until My Creations is shown. Press the quickset pad next to it.

2.Press the quickset pad next to ADD NEW CREATION to customize your cooking process.

3.Select cook mode.

4.Select cook temperature.

5.Select NEXT.

6.Select how to monitor cooking: Cook timer, probe or no alerts. Probe is not available in non-convection models.

7.If Cook Timer is selected, enter cook timer length.

8.Select NEXT.

WARNING

Burn Hazard

Use an oven mitt to remove temperature probe. Do not touch broil element.

Failure to follow these instructions can result in burns.

9.On Bake, Convect Bake or Convect Roast, the probe is available. If the probe is desired, select Probe and enter the target probe internal temperature.

10.Select NEXT.

11.Review your settings and select ADD STAGE or SAVE. If Add Stage is selected, repeat steps 3-10 and select SAVE.

12.Select a name for the new creation.

To use a previously created setting:

1.From the Select Mode Menu, touch the MORE button until My Creations is shown. Press the quickset pad next to it.

2.Press the quickset pad next to the desired setting.

3.Select START to begin preheating the oven or DELAY START to set desired start time.

NOTE: You may also delete a setting from this screen. Select DELETE then Yes.

13