Jenn-Air SVD48600 manual To adjust

Page 48

The access panel is easily opened or removed. To open panel, grasp upper corners and pull forward and down. To close panel, lift up and insert prongs into catches in the range.

To avoid the possibility of accidentally disconnect- ing any part of the ventilation system, do not use the area behind the access panel for storage.

To remove, pull forward to the "stop" position; lift up on the front of the rack and pull out.

_

c.t_, /E _rong

The oven temperature can be adjusted if all oven temperatures are too low or too high and the length of time to cook ALL foods is too long or too short. Do NOT adjust the temperature if only one or two items ere not baking properly.

To adjust

1. Touch the Bake Pad.

2. Enter 500 ° by touching the number pads: "5,0,0."

3.Touch and hold the Bake Pad for eight seconds until "0g°" appears in the Display.

4.Touch the appropriate number pads to enter the offset temperature. (Allowable range is -35 ° to +35°,) Note: Touching the Broil Pad will change the - sign to a positive number or back to a negative number.

Note: Do not change the temperature setting more than 10° before checking the oven.

5. Touch the Cancel Off Pad to return to the previous Display.

Important; The oven should be adjusted only 10 °and the oven should be tested. (We recommend baking two g" yellow layer cakes using a purchased box mix.) If the oven temperature is still too low or too high, repeat the procedure described above.

When necessary, follow these procedures to remove appliance for cleaning or servicing: 1. Shut-off gas supply to appliance.

2. Disconnect electrical supply to appliance.

3. Disconnect blower system.

4. Disconnect gas supply tubing to appliance.

5. Remove screws that secure appliance to cabinet or floor. Remove appliance from cabinet.

6. Reverse procedures to reinstall

7. Test ell joints for gas leaks with soap and water solution. NEVERUSEAMATCH OR OTHER FLAME TO LOCATE A GAS LEAK.

48

Image 48
Contents EmJENN-AIR What to do if YOU Smell GAS Jenn-Air Customer Assistance Appliance Usage Read before operating your range Fire Hazard Page Important Safety Notice and Warning Date Purchased Air Grille Ve ntilation System To adjust surface burner air shutter some models Rec essat cent ero f v alve st em and engag e Bl ad e with slo t in a djustingsc rewE p rop er fla m e siz e a t M eal se ttin g Damage to these areas Food To Install Burner Module To Install Grill Module To Remove Grill ModuleNever Leave Grill Unattended During Grill Operation Page Page Grill Burner Porcelain Burner BasinGrease Container To program Function PadsNumber Pads Oven Light Pad Control PanelPage For recommendationsfor specificfoods Different Racks Page To set Timer To cancel TimerI000 To set oven to start immediately and shut off automatically1g3o o Page IcooKSS For ConventionalBake use the Bake PadUse convectionbakingfor breads, cakes, cookies and pies Page Preheating is not necessary Page Convect Roasting Frozen to Finish Here are a few examples of times and temperatures KVE Use the Convect Roast Pad for best results00 H. L= Page Do not Attempt to CLEAN, RUB, or Applywater to Gasketon Oven To set oven to start cleaning immediately Omit steps 4 & 5 if you wish cleaningto begin immediatelyZoo To cancel self-clean Touch Cancel Off Pad Page Page Page Page To adjust Griddle Model AG302 Wok- Model AO142If ventilation system is not capturing smoke efficiently Check rack position Voltage into house may be low JENN-AIR If baking results differ from previous oven
Related manuals
Manual 2 pages 61.65 Kb