Check the followinglistto be sure a service call is really necessary. A quick reference of this manual may prevent an unneeded service call.
If grill or surface burner fails to light:
•check 10be sure unitis properlyconnectedto powersupply.
•check for a blowncircuitfuse or a trippedmain circuitbreaker.
•check to be sure burnerportsor ignitionportsare not clogged.
•checkto be sure igniterisclicking. If igniterdoesn'tclick,turncontrolknobOff and
clean iginitor. (See p. 46.)
s check to be sure appliance regulator is set for correct fuel. (See installation instructions.)
•checkto be sure inletpressureis adequate. (Call gas company.)
if the flame is uneven:
•burner ports may be clogged.
•flame settingmay need to be adjusted. (See p. 13.)
If grill or surface burner flame lifts off the ports:
•shutteronthe mixertube needsto be closeduntilflamesettleson the burnerports. (See pp.
If grill or surface burner flame is yellow in color:
•shutteron the mixertube needsto be openeduntilyellow disappears. (See pp. 12- 13)
If nothing on the range operates:
•checkfor a blown circuitfuse or a tripped main circuitbreaker.
•check if range is properlyconnectedto electric circuitin house.
If ventilation fan does not operate but everything else on the range does:
•check behind lower access panel if power cord to blower assembly has been disconnected.
If ventilation system is not capturing smoke efficiently:
•check on crossventilation in room or make up air.
•excessive amount of smoke is being created; check instructions for grilling,
trimming meats. (See pp.
soutside wall cap may be trapped shut.
•range may be improperly installed; check ducting information. (See p. 9.)
•air filter may be improperly installed (See p. 10.)
50