Using Infrared (IR)
You can use your device to connect to another device with infrared capabilities. To connect to another device via infrared:
1.Setup the device you want to connect to receive infrared beams. Refer to the technical documentation that came with the device.
2.Configure your device to receive infrared beams. Tap Start > Settings > Connections tab then tap Beam icon.
3.Tap to check Receive all incoming beams.
4.Tap 
.
5.Line up the infrared ports of both devices. Make sure that they are unobstructed and within range.
6.Send data from the source device. Upon connection, your device prompts that data is being received. Tap Cancel if you want to stop transfer.
7.When finished, tap Yes to accept and save data or tap No to discard data.
66
