Honeywell STR12D warranty Ansi Class 150/300/600 GFA

34-ST-03-64 Page 24

								STR14A
TABLE II - SEALS (continued)						STR12D & 13D			14G & 17G
	Diaphragm	Flange	Flange Pressure Rating			Selection
	Diameter	Size	Dependent on Customer Flange
3.5"		3"	ANSI Class 150/300/600			_ _ _ GFA _ _ _ _ _ _	●	●	●
			Diaphragm		Body
			316L SS		316 SS	_ _ _ _ _ _ GA _ _ _ _	●	●	●
	Wetted Material		Hastelloy C		316 SS	_ _ _ _ _ _ GB _ _ _ _	●	●	●
			Hastelloy C		Hastelloy C	_ _ _ _ _ _ GC _ _ _ _	●	●	●
			Monel		Monel	_ _ _ _ _ _ GE _ _ _ _	●	●	●
			Tantalum		Tantaluma	_ _ _ _ _ _ GG _ _ _ _	1	1	1
	Non-Wetted Material		No Selection			_ _ _ _ _ _ _ _ 0 _ _ _	●	●	●
	Bolts		No Selection			_ _ _ _ _ _ _ _ _ 0 _ _	●	●	●
	Calibration Rings			None		_ _ _ _ _ _ _ _ _ _ A _	●	●	●
			316 SS			_ _ _ _ _ _ _ _ _ _ B _	5	5	5
Pancake Seal			Hastelloy C			_ _ _ _ _ _ _ _ _ _ C _	5	5	5
			Monel			_ _ _ _ _ _ _ _ _ _ D _	5	5	5
	Flushing			None		_ _ _ _ _ _ _ _ _ _ _ 0	●	●	●
	Connections		One 1/4" with plastic plug			_ _ _ _ _ _ _ _ _ _ _ H	6	6	6
	and Plugs***		One 1/4" with metal plug			_ _ _ _ _ _ _ _ _ _ _ J	6	6	6
	(Metal plug material		Two 1/4" with plastic plugs			_ _ _ _ _ _ _ _ _ _ _ M	6	6	6
	will be the same as		Two 1/4" with metal plugs			_ _ _ _ _ _ _ _ _ _ _ N	6	6	6
	Cal. Ring material, if		One 1/2" with plastic plug			_ _ _ _ _ _ _ _ _ _ _ P	6	6	6
	metal plug is chosen -		One 1/2" with metal plug			_ _ _ _ _ _ _ _ _ _ _ Q	6	6	6
	SS Plug for CS Lower)		Two 1/2" with plastic plugs			_ _ _ _ _ _ _ _ _ _ _ R	6	6	6
			Two 1/2" with metal plugs			_ _ _ _ _ _ _ _ _ _ _ S	6	6	6

Table II continued below

*Standard facing 125-250 AARH RF (raised face) serrated finish.

***Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation a Tantalum Body has Tantalum wetted parts and 316 SS non-wetted parts

Note: Remote seal system pressure rating is body rating or seal rating, whichever is less.

							STR14A
TABLE II - SEALS (continued)					STR12D & 13D			14G & 17G
	Diaphragm	Flange	Flange Pressure Rating *		Selection
	Diameter	Size
Chemical Tee	3.5"	Taylor	750 psi		_ _ _ HM0 _ _ _ _ _ _	v
		Wedge 5"
"Taylor" Wedge		O.D.
			Diaphragm	Body	Selection
	Wetted Material		316L SS	316 SS	_ _ _ _ _ _ HA _ _ _ _	●
			Hastelloy C	316 SS	_ _ _ _ _ _ HB _ _ _ _	●
			Hastelloy C	Hastelloy C	_ _ _ _ _ _ HC _ _ _ _	●
	Non-Wetted Material		No	Selection	_ _ _ _ _ _ _ _ 0 _ _ _	●
	Bolts		No Selection		_ _ _ _ _ _ _ _ _ 0 _ _	●
	Styles		No Selection		_ _ _ _ _ _ _ _ _ _ 0 _	●
	No Selection		No Selection		_ _ _ _ _ _ _ _ _ _ _ 0	●

Table II continued next page