Honeywell STR12D warranty Warranty Options, Table III Options

TABLE IV

Factory Identification

34-ST-03-64 Page 28

STR14A

STR12D & 13D 14G & 17G

TABLE III - OPTIONS (continued)

Warranty Options				●	●	●
Additional Warranty - 1 year			W1
Additional Warranty - 2 years			W2	●	●	●
Additional Warranty - 3 years			W3	●	●	●
Additional Warranty - 4 years			W4	●	●	●
Approval	Approval Type	Location or Classification	Selection
Body
No hazardous location approvals			9X	●	●	●
	Explosion Proof	Class I, Div. 1, Groups A,B,C,D
Factory	Dust Ignition Proof	Class II, III Div. 1, Groups E,F,G	1C	●	●	●
	Non-Incendive	Class I, Div. 2, Groups A,B,C,D
Mutual
	Intrinsically Safe	Class I, II, III, Div. 1, Groups
		A,B,C,D,E,F,G
	Explosion Proof	Class I, Div. 1, Groups B,C,D
CSA	Dust Ignition Proof	Class II, III, Div. 1, Groups E,F,G	2J	●	●	●
	Intrinsically Safe	Class I, II, III, Div. 1, Groups
		A,B,C,D,E,F,G
SA	Intrinsically Safe	Ex ia IIC T4	4G	●	●	●
(Australia)	Non-Sparking	Ex n IIC T6 (T4 with SM option)
	Intrinsically Safe,	EEx ia IIC T4, T5,T6	3S	●	●	●
	Zone 0/1
	Flameproof, Zone 1	EEx d IIC T5, T6,	3D	●	●	●
		Enclosure IP 66/67
ATEX*	Non-Sparking, Zone 2	EEx nA, IIC T6	3N	●	●	●
		(Honeywell). Enclosure IP 66/67
	Multiple Marking**	Ex II 1 G EEx ia IIC T4, T5, T6
	Int. Safe, Zone 0/1, or	Ex II 2 G EEx d IIC T5, T6	3H	●	●	●
	Flameproof, Zone 1, or	Ex II 3 G EEx nA, IIC T6 (Honeywell)
	Non-Sparking, Zone 2	Enclosure IP 66/67
INMETRO	Flameproof, Zone 1	Ex d IIC T5	6D	●	●	●
(Brazil)

*See ATEX installation requirements in the ST 3000 User's Manual

**The user must determine the type of protection required for installation of the equipment. The user shall then check the box [√] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has been checked on the nameplate, subsequently the equipment shall not be reinstalled using any of the other certification types.

b

b

XXXX

● ● ●