Bunn ITCB-DV manual Using a Smart Funnel and a G9-2T DBC or MHG Grinder, Master Temp YES

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.) SET NEW RECIPE (to set a new COFFEE recipe using a Smart Funnel or RECIPE CARD)

Using a Smart Funnel and a G9-2T DBC or MHG Grinder:

This function allows the operator to set BREW VOL- UMES, PULSE BREW TIMES AND DRIP OUT TIMES for each coffee name preset in the grinder’s memory.

SET NEW RECIPE?

NOYES

	BREW	BREW	BREW
	A	B	C
MASTER TEMP XXX°
NO	YES

Certain coffee names are stored in the grinder’s memory. When a particular name of coffee is ground into the Smart Funnel, that name and the batch size selected are transferred from the grinder to the programming CHIP located in the funnel handle. The funnel is then inserted into the brewer’s funnel rails. The SENSING COIL on the brewer reads the information contained in the handle. The name of the coffee flavor will then appear on the display. This allows the operator to set the BREW VOLUME, PULSE BREW TIMES and DRIP OUT TIME for that particular coffee name. It also allows the operator to set other brewing parameters, such as BREW TEMPERATURE, BREW LOCKOUT, etc. Each coffee name can be set individually to provide optimum brewing quality.

	INSERT FUNNEL
CYCLES THROUGH	WITH NEW NAME
TWO SCREENS
		2 SEC.
	QUIT SETUP?
		YES
	BREW	BREW	BREW
	A	B	C
		FUNNEL DETECTED
	FUNNEL		FUNNEL CONTAINS
	CONTAINS NAME		NO NAME

(COFFEE NAME)					MUST GRIND INTO
NO			YES		FUNNEL FIRST
BREW		BREW	BREW
	A	B	C
		BEGIN SETUP OF
		(COFFEE NAME)
		SET UP BREW VOLUMES, BYPASS PERCENTAGE,			SEE SEPARATE DIAGRAMS
		PULSE BREW TIMES, AND DRIP OUT TIME			FOR SETUP INSTRUCTIONS
		2 BATCHES DONE?
		NO		YES
		BREW	BREW	BREW
		A	B	C
					P2854-1

(COFFEE NAME)

SETUP COMPLETE

Page 22 36748 101505