Bunn ITCB-DV manual Directly to step, Read SET Pulse Brew, Repeat steps 10, 11, ON/OFF button

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

Setting Pulse Brew – EASY Pulse Brew

NOTE: If the brewer is already on the SET PULSE BREW screen, skip steps 1 through 6, and proceed

REVIEW RECIPES

NO YES

BREW	BREW	BREW
A	B	C

directly to step 7.

1.	Press and hold the right hidden button until the dis-
	play reads SET LANGUAGE. Press the right hidden
	button until the display reads REVIEW RECIPES.
2.	Press YES to proceed. The display should now read
	TEA 1, along with MODIFY SHOW NEXT.
3.	Press and release NEXT to advance to the desired
	coffee recipe to be modified.
4.	Press and release MODIFY. The display should read
	BREW OZ:
5.	Press and release DONE. The display should read
	2 BATCHES DONE?
6.	Press and release YES. The display should now
	read SET PULSE BREW.
7.	Press and release YES. The display should now
	read SELECT METHOD.
8.	Press and release EASY. With EASY flashing, press
	and release NEXT to advance.

PRESSING NO WILL ADVANCE TO NEXT FUNCTION SCREEN

ADVANCE TO THE

RECIPE TO BE

MODIFIED

TEA 1

MODIFY SHOW NEXT

BREW	BREW	BREW
A	B	C

(RECIPE NAME)

MODIFY SHOW NEXT

BREW	BREW	BREW
A	B	C
	SET BREW OZ XX.X

WHEN BOTH BATCHES ARE DONE,

PRESS YES TO ADVANCE TO

SET PULSE BREW

SET PULSE BREW

NO YES

BREW	BREW	BREW
A	B	C

9.	The display should now read BREW TIME: and a
	batch light will be blinking. Press and release the
	batch size to be modified.
10.	Using (-)and (+), set the total brew time desired
	including spray times and off times.
11.	When finished, press the other batch size and repeat
	step # 10.
12.	When finished setting both batch sizes, press and
	release DONE. The display should read 2 BATCHES
	DONE?
13.	If both batch sizes are not correct, press and release

WITH EASY FLASHING SELECT METHOD

PRESS NEXT TO EASY NEXT MANUAL

ADVANCE

BREW	BREW	BREW
A	B	C

BREW TIME

(-) DONE (+)

SET BOTH	BREW	BREW	BREW
BATCH SIZES	A	B	C

NO to return to the BREW TIME setup screen and

repeat steps 10, 11 and 12.

14. If both batch sizes are correct, pressYES. The display

will show the pulse settings to accommodate the

brew time entered. Press and release each batch

size to display the settings for that batch. After a

delay, the display should now read DRIP TIME:. To

exit to the MAIN SCREEN, press and release the

ON/OFF button.

IF NO, RETURN TO

BREW TIME

1ST OFF LAST X:XX X:XX X:XX

BREW	BREW	BREW
A	B	C

2 BATCHES DONE?

NO YES

BREW	BREW	BREW
A	B	C

DRIP TIME

(-) DONE (+)

P2867

Page 36

36748 070706