Bunn 41343 manual Procedure to set ready temperature, Refill Range 20 to, Spray OZ/M

Page 31

PROGRAMMING FUNCTIONS - (cont.)

Procedure to set ready temperature:

1.Press and hold upper right hidden switch until the display reads UNITS. Release switch. Press and release upper right hidden switch until the display reads SET READY.

2.To adjust the ready temperature, press the (-)button to decrease, or (+) to increase the ready temperature.

3.When finished, press and release DONE to save the new setting, exit the SET READY function and advance to the next function screen, REFILL. Another alternative is to press and release either ON/OFF switch located on the front switch panel to exit the SET READY function and return to the

MAIN SCREEN.

REFILL - Range: 20 to 230

This function allows the operator to adjust the sensitivity of the refill circuit. This is mainly a trouble- shooting feature. Water in different geographical loca- tions can have different conductivities. By adjusting the sensitivity of the refill circuit, this will allow the brewer to operate under various water conditions.

XXXREFILL -> XXX (-) DONE (+)

L SPRY OZ/M (DUAL brewers). Another alternative is to press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit REFILL and return to the MAIN SCREEN.

SPRAY OZ/M

This function allows the operator to view or to enter the actual flow rate coming out of the sprayhead. This is NOT used to change the actual flow rate, but to tell the internal controller how fast the water is flowing. The unit of measure is ounces per minute (Oz/M).

Procedure to set the sensitivity threshold of the refill circuit:

NOTE: Make sure the water in the tank is touching the refill probe.

1. Press and hold upper right hidden switch until the display reads UNITS. Release switch. Press and release upper right hidden switch until the display reads REFILL and shows a number on both sides of the word.

2. To adjust the threshold setting, press (-)to de- crease, or (+) to increase the setting.

NOTE: Always make sure that the number on the right is larger than the number on the left when water is in contact with the refill probe in the tank.

3. When finished, press and release DONE. This saves the new setting and advances to the next function screen:

SPRY OZ/M (SINGLE brewers)

Page 31

41343 080108

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Phone 217 529-6601 FAX 217 Single GPR DBC-DVBUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesBrew Lockout Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board ScreenRecipes Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder Recipe Programing MethodsContinue to a LevelTo a ContinueContinue to G Continue to F Programming FunctionsContinue to D Continues to LReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Procedure for modifying units of measure Units Setting Units of MeasureProcedure for setting warmer control Procedure for setting auto warm shut offTIME? Main Screen Freshness TimeNEW Recipe ? Enable EnergysavrSET NEW Recipe Procedure for Setting the RecipeThis function allows the operator to set Brew Sizes DONE? SET NEW RecipeDone Being programmed modified along with Setup CompleteSET NEW Recipes Procedure to program the coffee nameReview RECIPES? No YES To exit, press Next until the display reads That Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes Review RecipesBatches DONE? No YES Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewSET Pulse Brew DONE? Procedure to set pulse brew by exampleSET Pulse Brew by Example Container READY?TIMES? SET Pulse Brew Enter TimesTo the Main Screen Batches DONE? SET PreinfusionReview Recipes screen Procedure to modify drip timesSetup Complete Units as wellSET Temp Enable ADS?Procedure to Enable/Disable Ads Procedure to set brew temperatureRefill Range 20 to Procedure to set ready temperatureSpray OZ/M Spray OZ/M Single Brewers Procedure to adjust the flow rate settingSpray OZ/M Dual Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow ? Calibrate FlowBrate Bypass .. Press Brew to Start Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersFunnel Detect Service ToolsBrewers Programming FunctionsPress Next to return to Test Outputs Service ToolsProcedure to test switches Left Brew Valve on Dual brewersFrequency Service Tools Procedures to test coil frequencyScreen Factory Defaults Procedure to set factory defaults

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents