Bunn 41343 manual Brew Counters, Procedures to view/reset the brew counters

Page 36

PROGRAMMING FUNCTIONS - (cont.)

BREW COUNTERS

This function allows the operator to track the number of brew cycles completed. The number of brew cycles on the left side, the right side, and the total of both combined can be tracked on DUAL brewers. There is one resettable counter, and one life counter that is not resettable for SINGLE brewers and three resettable counters, and one life counter that is not resettable for DUAL brewers.

Procedures to view/reset the brew counters:

1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch. Con- tinue to press and release switch until the display reads BREW COUNTERS.

2.Pressing NO in this screen will advance to the next function. Press YES to view the first brew counter (left side on DUAL brewers). This number repre- sents the brew cycles initiated since that counter was last reset.

3.To advance to the other counters, press and release NEXT. The four counters for DUAL brewers are as follows:

LEFT - total brews on left side (resettable) RIGHT - total brews on right side (resettable) LEFT AND RIGHT - total brews on left and right sides combined (resettable)

LEFT AND RIGHT - total brews on left and right sides combined (non-resettable)

4.To reset any of the counters to zero (except for the non-resettable counter), press and release RESET when viewing that particular counter's screen.

5.When finished, press NEXT to advance counter screens until the display reads BREW COUNTERS. Press and release NO to advance to the next function screen, or press and release the ON/OFF switch (either on DUAL brewers) on the front switch panel to exit the BREW COUNTERS function and return to the MAIN SCREEN.

BREW COUNTERS?

NO YES

EXIT TO

NEXT FUNCTION

SCREEN

SINGLE

BREWERS

X XXX

NEXT RESET

DUAL

BREWERS

LEFT

X XXX

 

NEXT RESET

RESETS LEFT

COUNTER

X XXX

RIGHT

X XXX

NEXT

 

NEXT RESET

RESETS RIGHT

COUNTER

L+R

X XXX

 

NEXT RESET

RESETS BOTH

LEFT AND RIGHT

COUNTERs

L+R

X XXX

NEXT

Page 36

41343 080108

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Single GPR DBC-DV Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingService TOOLS/TEST Outputs Programming Lockout Switch mounted on main control boardScreen Brew LockoutUsing a Smart Funnel and a G9-2T DBC or MHG Grinder Not using a Smart Funnel and/or a G9-2T DBC or MHG GrinderRecipe Programing Methods RecipesLevel To aContinue Continue to aProgramming Functions Continue to G Continue to FContinues to L Continue to DReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Units Setting Units of Measure Procedure for modifying units of measureProcedure for setting auto warm shut off Procedure for setting warmer controlTIME? Freshness Time Main ScreenEnable Energysavr NEW Recipe ?Procedure for Setting the Recipe SET NEW RecipeThis function allows the operator to set Brew SET NEW Recipe Sizes DONE?Being programmed modified along with Setup Complete DoneProcedure to program the coffee name SET NEW RecipesReview RECIPES? No YES Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee Favors Procedure for reviewing recipesReview Recipes To exit, press Next until the display reads ThatBrew OZ Setting or Adjusting Brew VOL- Umes Batches DONE? No YESBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew Procedure to set pulse brew by example SET Pulse Brew by ExampleContainer READY? DONE?SET Pulse Brew Enter Times TIMES?To the Main Screen SET Preinfusion Batches DONE?Procedure to modify drip times Setup CompleteUnits as well Review Recipes screenEnable ADS? Procedure to Enable/Disable AdsProcedure to set brew temperature SET TempProcedure to set ready temperature Refill Range 20 toSpray OZ/M Procedure to adjust the flow rate setting Spray OZ/M Single BrewersSpray OZ/M Dual Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersCalibrate Flow Calibrate Flow ?Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersService Tools Funnel DetectProgramming Functions BrewersService Tools Procedure to test switchesLeft Brew Valve on Dual brewers Press Next to return to Test OutputsService Tools Procedures to test coil frequency Screen Factory DefaultsProcedure to set factory defaults Frequency

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents