Bunn 41343 manual Freshness Time, Main Screen

Page 14

PROGRAMMING THE BREWER (cont.)

WARMER CONTROL (SETTING THE HEAT INTENSITY AND PROGRAMED TIME) (cont.)

10.Using (-)and (+), set the percent of heat to be applied to the warmer.

11.When finished, press the center program switch. The display should now read 3rd ON TIME on SINGLE brewers, (<-<-3rd ON TIME on DUAL brewers).

12.Using (-)and (+), set the amount of time the warm- ers are to operate.

13.When finished, press the center program switch. The display should now read 3rd ON POWER on SINGLE brewers, (<-<-3rd ON POWER on DUAL brewers).

14.Using (-)and (+), set the percent of heat to be applied to the warmer.

15.When finished, press the center program switch. The display will read FRESH TIME on SINGLE brewers, (1st ON TIME ->->on DUAL brewers).

16.On DUAL brewers, repeat steps 4 thru 14 for right side warmer.

17.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the WARMER CONTROL function and return to the MAIN SCREEN.

FRESHNESS TIME

This function activates a timer to provide a visual indication that the dispensed beverage has reached it's maximum hold time. All batch indicators on that side will flash when time expires.

NOTE: Flashing can be stopped by pressing any batch switch on the side activated, or by turning warmer off.

FRESH TIME: OFF (-) DONE (+)

P3262

Procedure for setting auto warm shut off:

1.Press and hold upper right hidden switch until the display reads UNITS. Press and release upper right hidden switch until the display reads FRESH TIME.

2.Using (-)and (+), set the amount of time the warmers are to be on before activating the alert.

3.Press DONE to store the programed time. The display should now read SET NEW RECIPE.

4.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the FRESH TIME function and return to the

MAIN SCREEN.

Page 14

41343 120710

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Single GPR DBC-DV Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingScreen Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board Brew LockoutRecipe Programing Methods Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder RecipesContinue LevelTo a Continue to aProgramming Functions Continue to G Continue to FReturn to B Continues to LContinue to D Byps OZ/M XX.X Spray Head CAL? Done YES Units Setting Units of Measure Procedure for modifying units of measureTIME? Procedure for setting auto warm shut offProcedure for setting warmer control Freshness Time Main ScreenEnable Energysavr NEW Recipe ?This function allows the operator to set Brew Procedure for Setting the RecipeSET NEW Recipe SET NEW Recipe Sizes DONE?Being programmed modified along with Setup Complete DoneProcedure to program the coffee name SET NEW RecipesReview RECIPES? No YES Review Recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes To exit, press Next until the display reads ThatBrew OZ Setting or Adjusting Brew VOL- Umes Batches DONE? No YESBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew Container READY? Procedure to set pulse brew by exampleSET Pulse Brew by Example DONE?To the Main Screen SET Pulse Brew Enter TimesTIMES? SET Preinfusion Batches DONE?Units as well Procedure to modify drip timesSetup Complete Review Recipes screenProcedure to set brew temperature Enable ADS?Procedure to Enable/Disable Ads SET TempSpray OZ/M Procedure to set ready temperatureRefill Range 20 to Spray OZ/M Dual Brewers Procedure to adjust the flow rate settingSpray OZ/M Single Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersCalibrate Flow Calibrate Flow ?Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersService Tools Funnel DetectProgramming Functions BrewersLeft Brew Valve on Dual brewers Service ToolsProcedure to test switches Press Next to return to Test OutputsProcedure to set factory defaults Service Tools Procedures to test coil frequencyScreen Factory Defaults Frequency

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents