Bunn 41343 manual Done, Being programmed modified along with Setup Complete

Page 18

PROGRAMMING THE BREWER (cont.)

SET NEW RECIPE (cont.)

24.When finished setting all batch sizes, press DONE. The display will show the ON and OFF TIMES that were entered for a particular batch size. After a 5 second delay, the display should read 3 BATCHES

DONE.

25.If the three batches are not complete, press NO in order to return to SET PREINFUSION, and repeat steps 19 through 24.

26.If the three batches are correct, press YES. This will advance to the next function, SET DRIP TIME. (Refer to page 31 for description of SET DRIP TIME function.)

DRIP TIME X:XX

(-) DONE (+)

3 BATCHES DONE?

NO YES

(COFFEE NAME)

SETUP COMPLETE

P2418

being programmed (modified) along with SETUP COMPLETE.

33.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

27.The display should now read DRIP TIME, along with either the word OFF, or a time will be showing. A batch light should also be blinking.

28.Using (-)and (+), set the amount of time from when the brew spray ends to when the funnel is emptied of hot liquid for that batch size.

NOTE: Set to OFF to prevent funnel locks from engaging (to disable this function), for a particular batch size. To set to OFF, continue to press and release (-)until OFF appears on the screen.

29. When finished, press another batch size and repeat step 28 until all three sizes are set.

30. When finished setting all batch sizes press DONE. The display should read 3 BATCHES DONE?.

31. If the three batch sizes are not correct, press NO to return to the DRIP TIME setup screen and repeat steps 28 through 30.

32. If the three batch sizes are correct, press YES. The screen should show the name of the coffee

Page 18

41343 080108

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Single GPR DBC-DV Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingScreen Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board Brew LockoutRecipe Programing Methods Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder RecipesContinue LevelTo a Continue to aProgramming Functions Continue to G Continue to FContinues to L Continue to DReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Units Setting Units of Measure Procedure for modifying units of measureProcedure for setting auto warm shut off Procedure for setting warmer controlTIME? Freshness Time Main ScreenEnable Energysavr NEW Recipe ?Procedure for Setting the Recipe SET NEW RecipeThis function allows the operator to set Brew SET NEW Recipe Sizes DONE?Being programmed modified along with Setup Complete DoneProcedure to program the coffee name SET NEW RecipesReview RECIPES? No YES Review Recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes To exit, press Next until the display reads ThatBrew OZ Setting or Adjusting Brew VOL- Umes Batches DONE? No YESBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew Container READY? Procedure to set pulse brew by exampleSET Pulse Brew by Example DONE?SET Pulse Brew Enter Times TIMES?To the Main Screen SET Preinfusion Batches DONE?Units as well Procedure to modify drip timesSetup Complete Review Recipes screenProcedure to set brew temperature Enable ADS?Procedure to Enable/Disable Ads SET TempProcedure to set ready temperature Refill Range 20 toSpray OZ/M Procedure to adjust the flow rate setting Spray OZ/M Single BrewersSpray OZ/M Dual Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersCalibrate Flow Calibrate Flow ?Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersService Tools Funnel DetectProgramming Functions BrewersLeft Brew Valve on Dual brewers Service ToolsProcedure to test switches Press Next to return to Test OutputsProcedure to set factory defaults Service Tools Procedures to test coil frequencyScreen Factory Defaults Frequency

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents