Bunn 41343 Procedure for setting auto warm shut off, Procedure for setting warmer control, Time?

Page 13

PROGRAMMING FUNCTIONS - (cont.)

AUTO WARMER SHUT OFF (SETTING THE AUTO WARMER TO OFF OR A PROGRAMED TIME)

This function allows the warmers on the brewer to be programed automatically shut off after a set time. When the timer expires the batch lights on that side will begin to flash to indicate the warmer(s) have shut off.

NOTE: Flashing can be stopped by pressing any batch switch on the side activated, or by turning the warmer back on. Turning the warmer back on reacti- vates the timer.

WARMER OFF: OFF (-) DONE (+)

P3261

Procedure for setting auto warm shut off:

1.Press and hold upper right hidden switch until the display reads UNITS. Press and release upper right hidden switch until the display reads WARMER OFF.

2.Using (-)and (+), set the amount of time the warmers are to operate.

3.When finished, press DONE to store the programed time. The display should now read WARMER CONTROL?.

4.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the AUTO WARMER function and return to the MAIN SCREEN.

WARMER CONTROL (SETTING THE HEAT INTENSITY AND PROGRAMED TIME)

This function allows the heat intensity and warm time of the warmer(s) on the brewer to be adjusted. When the timer expires the batch lights on that side will begin to flash to indicate the warmer(s) have shut off.

NOTE: Flashing can be stopped by pressing any batch switch on the side activated, or by turning the warmer back on. Turning the warmer back on reacti- vates the timer.

WARMER CONTROL?

NO DONE YES

Procedure for setting warmer control:

1.Press and hold upper right hidden switch until the display reads UNITS. Press and release upper right hidden switch until the display reads WARMER CONTRL?.

2.Press and release NO. The display will read FRESH

TIME?

3.Press YES to proceed. The display should now read 1st ON TIME on SINGLE brewers, (<-<-1st ON TIME on DUAL brewers).

4.Using (-)and (+), set the amount of time the warmers are to operate.

5.When finished, press the center program switch. The display should now read 1st ON POWER on SINGLE brewers (<-<-1st ON POWER on DUAL brewers).

6.Using (-)and (+), set the percent of heat to be applied to the warmer.

7.When finished, press the center program switch. The display should now read 2nd ON TIME on SINGLE brewers, (<-<-2nd ON TIME on DUAL brewers).

8.Using (-)and (+), set the amount of time the warmers are to operate.

9.When finished, press the center program switch. The display should now read 2nd ON POWER on SINGLE brewers, (<-<-2nd ON POWER on DUAL brewers).

Page 13

41343 120710

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Phone 217 529-6601 FAX 217 Single GPR DBC-DVBUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesProgramming Lockout Switch mounted on main control board Service TOOLS/TEST OutputsScreen Brew LockoutNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder Using a Smart Funnel and a G9-2T DBC or MHG GrinderRecipe Programing Methods RecipesTo a LevelContinue Continue to aContinue to G Continue to F Programming FunctionsContinue to D Continues to LReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Procedure for modifying units of measure Units Setting Units of MeasureProcedure for setting warmer control Procedure for setting auto warm shut offTIME? Main Screen Freshness TimeNEW Recipe ? Enable EnergysavrSET NEW Recipe Procedure for Setting the RecipeThis function allows the operator to set Brew Sizes DONE? SET NEW RecipeDone Being programmed modified along with Setup CompleteSET NEW Recipes Procedure to program the coffee nameReview RECIPES? No YES Procedure for reviewing recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsReview Recipes To exit, press Next until the display reads ThatBatches DONE? No YES Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewSET Pulse Brew SET Pulse Brew by Example Procedure to set pulse brew by exampleContainer READY? DONE?TIMES? SET Pulse Brew Enter TimesTo the Main Screen Batches DONE? SET PreinfusionSetup Complete Procedure to modify drip timesUnits as well Review Recipes screenProcedure to Enable/Disable Ads Enable ADS?Procedure to set brew temperature SET TempRefill Range 20 to Procedure to set ready temperatureSpray OZ/M Spray OZ/M Single Brewers Procedure to adjust the flow rate settingSpray OZ/M Dual Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow ? Calibrate FlowBrate Bypass .. Press Brew to Start Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersFunnel Detect Service ToolsBrewers Programming FunctionsProcedure to test switches Service ToolsLeft Brew Valve on Dual brewers Press Next to return to Test OutputsScreen Factory Defaults Service Tools Procedures to test coil frequencyProcedure to set factory defaults Frequency

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents