Bunn 41343 manual SET Pulse Brew Enter Times, Times?, To the Main Screen

Page 27

PROGRAMMING FUNCTIONS - (cont.)

SET PULSE BREW - ENTER TIMES

This function allows adjustment of the pulse brew by entering actual times for each of the settings.

Procedure to enter actual times for pulse brew: NOTE: The procedure to enter the Pulse Brew Function

(Page 21) area of the program must be performed prior following the steps listed below.

1.Press and release YES. The display should now read SET BY EXAMPLE.

2.Press and release NO. The display will read ENTER

TIMES?

3.Press YES to proceed. The display should now read 1st ON TIME.

4.Using (-)and (+) set the amount of time the flow of water into the funnel will be on.

5.When finished, press DONE. The display will now read OFF TIME X:XX.

6.Using (-)and (+) set the amount of time the flow of water into the funnel will be off.

7.When finished, press DONE. The display will now read LAST ON TIME X:XX

8.Using (-)and (+) set the amount of time the water will be on to complete the brew.

9.When finished, press DONE. The display will show the three times just entered for that batch size. After a 5 second delay, the display will read 3 BATCHES

DONE?

10.If other batch sizes need to be modified, press NO. The display will then read SET BY EXAMPLE.

11.In that screen, press NO. The display should now read ENTER TIMES.

12.Press YES in this screen, then press a different batch size pad and repeat steps 3 through 5. Re- peat until all the desired batch sizes are set (for the left side on DUAL brewers).

13.When finished press YES in 3 BATCHES DONE?. The display will then read SET PREINFUSION.

14.Press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the SET PULSE BREW function and return

to the MAIN SCREEN.

NOTE: Pressing the upper right hidden button before reaching the final setting screen exits the setup and retains the old values.

SET PULSE BREW ?

NO YES

SET BY EXAMPLE ?

 

NO

YES

EXIT TO

 

 

 

 

NEXT FUNCTION

 

 

SCREEN

ENTER TIMES?

NO YES

1st ON TIME X:XX (-) DONE (+)

OFF TIMES: X:XX (-) DONE (+)

LAST ON: PreI (-) DONE (+)

1st OFF LAST

X:XX X:XX PreI

3 BATCHES DONE ?

 

NO

YES

EXIT TO

 

 

 

 

NEXT FUNCTION

 

 

SCREEN

Page 27

41343 080108

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Phone 217 529-6601 FAX 217 Single GPR DBC-DVBUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesBrew Lockout Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board ScreenRecipes Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder Recipe Programing MethodsContinue to a LevelTo a ContinueContinue to G Continue to F Programming FunctionsContinues to L Continue to DReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Procedure for modifying units of measure Units Setting Units of MeasureProcedure for setting auto warm shut off Procedure for setting warmer controlTIME? Main Screen Freshness TimeNEW Recipe ? Enable EnergysavrProcedure for Setting the Recipe SET NEW RecipeThis function allows the operator to set Brew Sizes DONE? SET NEW RecipeDone Being programmed modified along with Setup CompleteSET NEW Recipes Procedure to program the coffee nameReview RECIPES? No YES To exit, press Next until the display reads That Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes Review RecipesBatches DONE? No YES Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewSET Pulse Brew DONE? Procedure to set pulse brew by exampleSET Pulse Brew by Example Container READY?SET Pulse Brew Enter Times TIMES?To the Main Screen Batches DONE? SET PreinfusionReview Recipes screen Procedure to modify drip timesSetup Complete Units as wellSET Temp Enable ADS?Procedure to Enable/Disable Ads Procedure to set brew temperatureProcedure to set ready temperature Refill Range 20 toSpray OZ/M Procedure to adjust the flow rate setting Spray OZ/M Single BrewersSpray OZ/M Dual Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow ? Calibrate FlowBrate Bypass .. Press Brew to Start Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersFunnel Detect Service ToolsBrewers Programming FunctionsPress Next to return to Test Outputs Service ToolsProcedure to test switches Left Brew Valve on Dual brewersFrequency Service Tools Procedures to test coil frequencyScreen Factory Defaults Procedure to set factory defaults

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents