Bunn 41343 manual Brew OZ Setting or Adjusting Brew VOL- Umes, Batches DONE? No YES

Page 22

PROGRAMMING FUNCTIONS - (cont.)

BREW OZ (SETTING OR ADJUSTING BREW VOL- UMES)

This function allows adjustment of the brew vol- umes for each batch. The indicator signifies volume in ounces per batch.

Procedure for modifying recipes - brew ounces: Range: 10.0 oz to 400 oz for all three batch sizes

1.Press and hold upper right hidden switch (®) until the display reads UNITS. Release the switch, then press and release switch until the display reads

REVIEW RECIPES.

2.Press YES to proceed. The display should now read:

NO NAME, along with MODIFY, SHOW and NEXT (SINGLE brewers)

NO-NAME LEFT, along with MODIFY, SHOW and NEXT (DUAL brewers).

3.Press and release NEXT to advance to the desired coffee name to be modified.

4.Press and release MODIFY. The display should read BREW OZ: and a batch light will be blinking. Press and release the batch size to be modified.

5.Using (-)and (+), set the amount of brew water, in ounces, to be dispensed over the grounds for that particular batch size.

6.When finished, press another batch size and repeat step 5 for that size for each batch size to be modi- fied. Continue setting all batch sizes.

7.When finished setting all batch sizes, press and release DONE. The display should read 3 BATCH

SIZES DONE?

8.If the three batch sizes are not correct, press and release NO to return to the BREW OUNCES setup screen and repeat steps 5, 6 and 7.

9.If the three batch sizes are correct, press YES. This will advance to the % BYPASS function. Another alternative is to press and release the ON/OFF switch (either on DUAL brewers) to exit the BREW OZ setup and return to the MAIN SCREEN.

REVIEW RECIPES?

NOYES

EXIT TO

NEXT FUNCTION

SCREENSINGLE BREWERS

NO-NAME

MODIFY SHOW NEXT

DUAL

BREWERS

NO-NAME LEFT

MODIFY SHOW NEXT

BREW OZ. XX.X (-) DONE (+)

3 BATCHES DONE?

NO YES

%BYPASSS XX.X (-) DONE (+)

SEE MODIFYING

BYPASS PERCENTAGES

ON THE FOLLOWING PAGE

OR PRESS AND RELEASE

ON/OFF SWITCH TO EXIT THE

BREW OZ: SETUP AND RETURN

TO THE MAIN SCREEN

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED

IN THE BREWER"S MEMORY

(COFFEE NAME)

MODIFY SHOW NEXT

WHEN THE LAST COFFEE

NAME IN BREWER'S MEMORY

IS DISPLAYED, PRESSING NEXT WILL EXIT AND THE DISPLAY WILL THEN READ:

THAT WAS THE

LAST RECIPE

Page 22

41343 080108

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Single GPR DBC-DV Phone 217 529-6601 FAX 217BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingScreen Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board Brew LockoutRecipe Programing Methods Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder RecipesContinue LevelTo a Continue to aProgramming Functions Continue to G Continue to FContinue to D Continues to LReturn to B Byps OZ/M XX.X Spray Head CAL? Done YES Units Setting Units of Measure Procedure for modifying units of measureProcedure for setting warmer control Procedure for setting auto warm shut offTIME? Freshness Time Main ScreenEnable Energysavr NEW Recipe ?SET NEW Recipe Procedure for Setting the RecipeThis function allows the operator to set Brew SET NEW Recipe Sizes DONE?Being programmed modified along with Setup Complete DoneProcedure to program the coffee name SET NEW RecipesReview RECIPES? No YES Review Recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes To exit, press Next until the display reads ThatBrew OZ Setting or Adjusting Brew VOL- Umes Batches DONE? No YESBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew Container READY? Procedure to set pulse brew by exampleSET Pulse Brew by Example DONE?TIMES? SET Pulse Brew Enter TimesTo the Main Screen SET Preinfusion Batches DONE?Units as well Procedure to modify drip timesSetup Complete Review Recipes screenProcedure to set brew temperature Enable ADS?Procedure to Enable/Disable Ads SET TempRefill Range 20 to Procedure to set ready temperatureSpray OZ/M Spray OZ/M Single Brewers Procedure to adjust the flow rate settingSpray OZ/M Dual Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersCalibrate Flow Calibrate Flow ?Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersService Tools Funnel DetectProgramming Functions BrewersLeft Brew Valve on Dual brewers Service ToolsProcedure to test switches Press Next to return to Test OutputsProcedure to set factory defaults Service Tools Procedures to test coil frequencyScreen Factory Defaults Frequency

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents