Bunn 41343 manual Bypass

Page 23

PROGRAMMING FUNCTIONS - (cont.)

% BYPASS

This function allows adjustment of the amount of water that bypasses the grounds. The number signi- fies the percentage of the brew volume which does not flow over the coffee grounds.

Modifying recipes - bypass percentages: Range: 0% to 90% for all three batch sizes

NOTE: If the brewer is already in the % BYPASS screen, it is not necessary to follow steps 1 through 6 in this section, but proceed directly to step 7.

1.Press and hold the upper right hidden switch (®) until the display reads UNITS. Release the switch, then press and release the switch until the display reads REVIEW RECIPES.

2.Press YES to proceed. The display should now read:

NO NAME, along with MODIFY, SHOW and NEXT (SINGLE brewers)

NO-NAME LEFT, along with MODIFY, SHOW and NEXT (DUAL brewers).

3.Press and release NEXT to advance to the desired

EXIT TO

NEXT FUNCTION

SCREEN

coffee name to be modified.

4.Press and release MODIFY. The display should read BREW OZ.

5.Press and release DONE. The display should read 3 BATCHES DONE?.

6.Press and release YES. The display should now read % BYPASS, and a batch light will be blinking. Press and release the batch size to be modified.

7.Using (-)and (+) set the amount of bypass water (percentage) to be dispensed around the grounds for that particular batch size.

8.When finished, press another batch size and repeat step 7 for each batch to be modified.

9.When finished setting all batch sizes, press DONE. The display should read 3 BATCHES DONE?

10.If they are not correct, press and release NO to return to the % BYPASS setup screen.

11.If the 3 batch sizes are correct, press YES. This will advance to SET PULSE BREW. Another alternative is to press the ON/OFF switch (either on DUAL brewers) to exit % BYPASS setup and return to the MAIN SCREEN.

REVIEW RECIPES?

NOYES

SINGLE DUAL

BREWERS BREWERS

NO-NAME

NO-NAME LEFT

MODIFY SHOW NEXT

MODIFY SHOW NEXT

% BYPASSS XX.X (-) DONE (+)

3 BATCHES DONE?

NO YES

SET PULSE BREW?

NO YES

BREW OZ. XX.X (-) DONE (+)

3 BATCHES DONE?

NO YES

SEE MODIFYING

PULSE BREW ON

THE FOLLOWING PAGE

OR PRESS AND RELEASE

ON/OFF SWITCH TO EXIT THE

%BYPASS SETUP AND RETURN TO THE MAIN SCREEN

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED

IN THE BREWER"S MEMORY

(COFFEE NAME)

MODIFY SHOW NEXT

WHEN THE LAST COFFEE

NAME IN BREWER'S MEMORY

IS DISPLAYED, PRESSING NEXT WILL EXIT AND THE DISPLAY WILL THEN READ:

THAT WAS THE

LAST RECIPE

Page 23

41343 080108

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Phone 217 529-6601 FAX 217 Single GPR DBC-DVBUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesBrew Lockout Service TOOLS/TEST OutputsProgramming Lockout Switch mounted on main control board ScreenRecipes Using a Smart Funnel and a G9-2T DBC or MHG GrinderNot using a Smart Funnel and/or a G9-2T DBC or MHG Grinder Recipe Programing MethodsContinue to a LevelTo a ContinueContinue to G Continue to F Programming FunctionsReturn to B Continues to LContinue to D Byps OZ/M XX.X Spray Head CAL? Done YES Procedure for modifying units of measure Units Setting Units of MeasureTIME? Procedure for setting auto warm shut offProcedure for setting warmer control Main Screen Freshness TimeNEW Recipe ? Enable EnergysavrThis function allows the operator to set Brew Procedure for Setting the RecipeSET NEW Recipe Sizes DONE? SET NEW RecipeDone Being programmed modified along with Setup CompleteSET NEW Recipes Procedure to program the coffee nameReview RECIPES? No YES To exit, press Next until the display reads That Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes Review RecipesBatches DONE? No YES Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewSET Pulse Brew DONE? Procedure to set pulse brew by exampleSET Pulse Brew by Example Container READY?To the Main Screen SET Pulse Brew Enter TimesTIMES? Batches DONE? SET PreinfusionReview Recipes screen Procedure to modify drip timesSetup Complete Units as wellSET Temp Enable ADS?Procedure to Enable/Disable Ads Procedure to set brew temperatureSpray OZ/M Procedure to set ready temperatureRefill Range 20 to Spray OZ/M Dual Brewers Procedure to adjust the flow rate settingSpray OZ/M Single Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow ? Calibrate FlowBrate Bypass .. Press Brew to Start Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersFunnel Detect Service ToolsBrewers Programming FunctionsPress Next to return to Test Outputs Service ToolsProcedure to test switches Left Brew Valve on Dual brewersFrequency Service Tools Procedures to test coil frequencyScreen Factory Defaults Procedure to set factory defaults

41343 specifications

The Bunn 41343 is a highly efficient commercial coffee maker designed to meet the demands of busy coffee shops, restaurants, and offices. This model exemplifies Bunn's long-standing reputation for producing reliable brewing equipment that delivers consistent and quality coffee.

One of the standout features of the Bunn 41343 is its fast brewing capability. It can brew up to 3.8 gallons of coffee per hour, allowing establishments to keep pace with high customer demand. This is particularly beneficial during peak hours, ensuring that fresh coffee is always available. The design includes a stainless steel brew funnel that helps maintain thermal stability and ensures even extraction of coffee grounds.

The Bunn 41343 also incorporates advanced brewing technologies. It uses a unique spray-head design that evenly disperses hot water over the coffee grounds. This results in optimal flavor extraction and a rich, aromatic cup of coffee. The machine operates at a precise water temperature, which typically ranges from 195°F to 205°F, further enhancing the brewing process.

The brewer is equipped with a large internal hot water tank that maintains an optimal water temperature, ensuring that hot water is always available for brewing. This thermal retention system minimizes wait times and improves overall efficiency in environments where speed is crucial.

In terms of usability, the Bunn 41343 is designed with an intuitive interface that allows for easy operation. It features simple controls and clear indicators that help ensure consistent brewing results. The machine also comes with a built-in cleaning cycle that simplifies maintenance, allowing operators to keep it in top condition with minimal effort.

In terms of construction, the Bunn 41343 is built with durability in mind. The heavy-duty stainless steel exterior not only enhances its longevity but also gives it a professional appearance suitable for any commercial setting. Additionally, this model is designed to accommodate various cup sizes, making it versatile for different customer preferences.

In conclusion, the Bunn 41343 stands out as a robust commercial coffee maker that combines fast brewing capabilities with advanced brewing technologies. Its user-friendly design and durable construction make it an ideal choice for any coffee-centric business seeking quality and efficiency. Whether brewers are aiming to satisfy a morning rush or a steady afternoon crowd, the Bunn 41343 delivers with consistent performance and exceptional coffee flavor.
Top Page Image Contents