CDA RC 9000 Conversion to Natural Gas or to LPG, Injectors replacement of top burners

Page 38

Conversion to Natural Gas or to LPG

Injectors replacement of top burners

Every cooker is provided with a set of injectors for the various types of gas.

Injectors not supplied can be obtained from the After-Sales Service.

Select the injectors to be replaced according to the table at page 40.

The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each injector.

To replace the injectors proceed as follows:

Remove the grids and extract the burner bodies.

Using a wrench, substitute the nozzle injectors “J” (Figs. 38 - 39) with those most suitable for the kind of gas for which it is to be used (see “Table for the choice of the injectors”).

The burners are constructed in such a way so as not to require the regulation of the primary air.

J

J

Fig. 38

Fig. 39

38

Image 38
Contents Dual fuel Cookers CDA Contents Introduction Assembling the backguardFeatures and technical data Gas burnersControl panel Control Panel Controls descriptionElectronic programmer Electronic clock fig Electronic timerAltering the audible signal Normal cooking without the use of the programmerAutomatic oven cooking Semi-automatic cooking Electric ignition How to use the hob burnersHob burners Lighting of the hob burnersChoice of burner Correct use of triple-ring burnerOperating principles How to use the Multifunction ovenGeneral features Oven light Traditional convection cookingHot air cooking GrillingDefrosting frozen foods Ventilated grill cooking Convection cooking with ventilationSimultaneous cooking of different foods SterilizationRegeneration Use of the grill Grilling and au gratinRoasting Important notes Do’s and do not’s For your safetyDo’s and do not’s Care and maintenance Flexible tubeEnamelled parts Burners Triple ring burnerRemoval of the inner glass door panel Storage compartmentInside of oven Assembling and dismantling of the side runner framesOven tray Door assembly Removing the oven doorFor Installer Location Fitting the adjustable feet Levelling the cooker Stability bracket Provison for ventilation Gas installation Important Note Installation to Natural Gas Gas connectionPlug 200 mm 700 mm Injectors replacement of top burners Conversion to Natural Gas or to LPGAdjusting of the minimum of the top burners Lubrication of the gas taps Table for the choice of the injectorsFeeder cable section Electrical installationConnecting feeder cable Appliance servicing Guarantee Limit of CoverRC 9000 .. cookers