28
Over Doors - Cleaning The Panes Of Glass
The oven doors have two panes. To clean these, you need to remove the inner pane.
Removing the Inner Pane
–Open the door to the full extent (fig. 24a).
–Attach the swivel retainers of the rh and lh hinges onto the metal bar above them (fig. 24b).
–Gently pull out the inner pane of glass (Fig. 25a).
–Clean the glass with an appropriate cleaner.
–Dry thoroughly, and place the pane on a soft surface.
–Now you can also clean the inside of the outer glass.
Fig. 25a |
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the panes of glass since they can scratch the surface, which may result in shattering of the glass.
Reassembling the Inner Pane
–Check the correct positioning of the no.4 (four) silicon rubbers D (fig. 25b).
–Check that you are holding the pane the correct way. You should be able to read the wording on it as it faces you.
–Insert the inner pane in the left E and right F side guides (fig. 25c) and gently let it slide up to the retainers H (fig. 25d).
–Unlock the oven door by opening it completely and detaching the swivel retainers of the lh and rh hinges from the metal bar above them (fig. 24a).
It is normal the opened gap between the top edge of the inner glass and the top of the door. This allows the cooling air circulation.
D |
Fig. 25b |
E |
F |
Fig. 25c |
H |
Fig. 25d |