30
Assembling the Backguard
Before installing the cooker, assemble the backguard V (fig. 27). Please note that :
–The backguard V can be found packed at the rear of the cooker.
–Before assembling remove any protective film/adhesive tape.
–The backguard must be fixed to the cooktop using the three supports B and screws A supplied with the appliance (see fig. 27).
B
A
Fig. 27 |
V |
Levelling the Cooker
The cooker is equipped with 4 levelling feet and may be levelled by screwing or unscrewing the feet with a spanner (fig. 28).
It is important to observe the prescriptions of figures 28a - 28b.
Fig. 28a
0
+8 mm 
Fig. 28b
+8 mm 
+35 mm 
Fig. 28