Chilled Water Performance Specifications 12.8°C (55°F) EWT
|
|
|
|
|
| Total CW | ||
Temperature dry bulb | CW Delta T | Total Net | Sensible Net | Sensible Heat | CW Flow Rate | Pressure | ||
(DB), wet bulb (WB) | Capacity | Capacity | Ratio | Drop | ||||
°C (°F) | l/s (GPM) | |||||||
°C (°F) | kW (BTU/hr) | kW (BTU/hr) | SHR | kPa (ft | ||||
|
|
|
|
|
| H2O)* | ||
26.7°C DB, 17.1°C WB | (80°F DB, 62.8°F | WB) |
|
|
|
|
| |
| 5.5 (10) | 24.7 (85,000) | 24.7 (85,000) | 1.00 | 1.2 (18.3) | 33 | (11.3) | |
| 6.6 (12) | 22.3 (76,000) | 22.3 (76,000) | 1.00 | 0.9 (13.9) | 20 (6.7) | ||
| 7.7 (14) | 20.0 (68,000) | 20.0 (68,000) | 1.00 | 0.7 (10.8) | 12 (4.2) | ||
| 8.8 (16) | 17.8 (61,000) | 17.8 (61,000) | 1.00 | 0.5 (8.6) | 8 | (2.8) | |
| 10 (18) | 15.8 (54,000) | 15.8 (54,000) | 1.00 | 0.4 (6.9) | 5 | (1.8) | |
| 11.1 (20) | 13.9 (48,000) | 13.9 (48,000) | 1.00 | 0.4 (5.6) | 4 | (1.2) | |
29.4°C DB, 18.1°C WB | (85°F DB, 64.5°F | WB) |
|
|
|
|
| |
| 5.5 (10) | 31.3 (107,000) | 31.3 (107,000) | 1.00 | 1.4 (22.6) | 50 | (16.9) | |
| 6.6 (12) | 28.5 (97,000) | 28.5 (97,000) | 1.00 | 1.1 (17.3) | 30 | (10.2) | |
| 7.7 (14) | 25.8 (88,000) | 25.8 (88,000) | 1.00 | 0.9 (13.6) | 19 (6.5) | ||
| 8.8 (16) | 23.3 (80,000) | 23.3 (80,000) | 1.00 | 0.7 (10.8) | 8 | (4.2) | |
| 10 (18) | 21.0 (72,000) | 21.0 (72,000) | 1.00 | 0.6 (8.8) | 8 | (2.8) | |
| 11.1 (20) | 18.7 (64,000) | 18.7 (64,000) | 1.00 | 0.5 (7.2) | 6 | (1.8) | |
32.2°C DB, 18.9°C WB | (90°F DB, 66.1°F | WB) |
|
|
|
|
| |
| 5.5 (10) | 39.1 (133,000) | 39.1 (133,000) | 1.00 | 1.7 (27.7) | 75 | (24.9) | |
| 6.6 (12) | 35.9 (123,000) | 35.9 (123,000) | 1.00 | 1.3 (21.3) | 45 (15.02) | ||
| 7.7 (14) | 32.8 (112,000) | 32.8 (112,000) | 1.00 | 1.1 (16.9) | 29 (9.7) | ||
| 8.8 (16) | 30.0 (102,000) | 30.0 (102,000) | 1.00 | 0.9 (13.6) | 19 (6.5) | ||
| 10 (18) | 27.2 (93,000) | 27.2 (93,000) | 1.00 | 0.7 (11.1) | 13 (4.4) | ||
35.0°C DB, 19.8°C WB | (95°F DB, 67.7°F | WB) |
|
|
|
|
| |
| 6.6 (12) | 44.2 (151,000) | 44.2 (151,000) | 1.00 | 1.6 (25.9) | 66 | (21.9) | |
| 7.7 (14) | 40.8 (139,000) | 40.8 (139,000) | 1.00 | 1.3 (20.6) | 42 | (14.1) | |
| 8.8 (16) | 37.5 (128,000) | 37.5 (128,000) | 1.00 | 1.1 (16.7) | 28 (9.5) |
37.8°C DB, 20.7°C WB (100°F DB, 69.2°F WB)
7.7 (14) | 49.8 (170,000) | 49.8 (170,000) |
40.6°C DB, 21.6°C WB (105°F DB, 70.8°F WB)
1.00
1.6 (24.8)
60 (20.1)
7.7 (14) | 59.7 (204,000) | 59.7 (204,000) | 1.00 | 1.9 (29.5) | 84 (28.2) |
Note: All values are accurate to +/- 5% and based on full speed with standard filters.
Note: Reduce airflow and cooling capacity specifications by 7% for cooling units run at low input voltage (380 V).
Note: Any CW flow rate of 0.19 l/s - 0.32 l/s (3.0 GPM - 5.0 GPM) may cause an increased error in flow rate and power calculation. A fluid flow fault may result. Any flow rate under 0.19 l/s (3.0 GPM) may also display as 0 in the flow rate and power calculation. Note: For sustained operation, a maximimum flow rate of 2.2 l/s (34 GPM) is recommended. This may be exceeded by 25% for peak conditions.
* To convert feet of water to PSIG, use the following formula: ft H2O ÷ 2.307 = PSIG.
InRow RP Technical Data Manual | 21 |