Programming
NA
RINSING CYCLE
This function performs a rinsing cycle using water to clean all components involved in brewing coffee.
!A person should be present during the rinsing cycle to supervise the operation.
Use the key to select this function:
RINSING | CYCLE | * |
FACTORY | SETTINGS |
|
Press the key.
The display will show:
RINSING CYCLE
NO
Use the key to select
RINSING CYCLE
YES
Press the key to start the rinsing cycle. The display shows:
RINSING CYCLE
The machine dispenses about half the quantity of water contained in the tank from the brew unit.
Then the cycle stops automatically, and the display shows:
SELECT PRODUCT
READY FOR USE
Factory settings
This function resets the machine’s operating parameters to the manufacturer’s settings.
Use the key to select this function:
FACTORY SETTINGS *
EXIT
Enable it with the key.
The display then shows:
FACTORY SETTINGS
NO
Choose whether to restore parameters with the key, and press the key to confirm.
!Warning: when all parameters are restored to factory settings, all customised settings are lost.
22