function
SHOW CLOCK TIME | * |
ON |
|
Save using the key.
!Note: the time is only displayed at certain times. This function can only be disabled by the user.
To disable this function, use the key to choose:
SHOW CLOCK TIME | * |
OFF |
|
Save using the key.
Regulating on/off times
The machine can be programmed to switch on and off automatically. Only one “on” time and one “off” time can be programmed on the machine.
!Note: this function is enabled only if the main switch is in the “I” position (on).
Use the key to select this function:
ON/OFF TIME | * |
SHOW CLOCK TIME |
|
Enable it with the key. |
|
ON/OFF TIME |
|
ON TIME | 0:00 |
Set the “on” time by pressing the key and save using the key.
Next, press the key to set the minutes and save using key.
ON/OFF TIME |
|
OFF TIME | 0:00 |
Set the “off” time by pressing the key and save using key.
Next, press the key to set the minutes and save using key.
! Attention: if the on and off times coincide, the |
| |
NA | ||
machine ignores both settings. The clock must be | ||
enabled after this programming in order to function |
| |
| ||
correctly. |
|
To enable automatic on/off
!Note: this function is enabled only if on/off times has been programmed.
Use the key to select this function:
AUTOMATIC ON/OFF *
CLOCK TIME
Enable it with the key.
AUTOMATIC ON/OFF
NO
In this case disables this function.
Enable the function with the key and when the display shows
AUTOMATIC ON/OFF
YES
save using the key.
Check the parameter settings when exiting programming. If the current time falls within the disabled period the display shows:
STANDBY
!Note: during the disabled phase the machine may be reactivated at any time by pressing the key. To disable the machine again, go into programming by pressing and exit immediately by pressing the key.
21