Haier HVZ040ABH5S Proper wine & beverage center care and cleaning, Cleaning and Maintenance

English

proper wine & beverage center care and cleaning

Cleaning and Maintenance

Warning: To avoid electric shock always unplug your wine & beverage center before cleaning. Ignoring this warning may result in death or injury.

Caution: Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage.

General:

Door Gaskets:

• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use sponge or soft cloth, dampened with the cleaning solution, to wipe down your wine & beverage center.

• Rinse with clean warm water and dry with a soft cloth.

• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,concentrated detergents, solvents or metal scouring pads. SOME of these chemicals may dissolve, damage and/or discolor your wine & beverage center.

•Clean door gaskets every three months according to general instructions. Gaskets must be kept clean and pliable to assure a proper seal.

•Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket pliable and ensure a good seal.

Power Interruptions

•Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs. When power has been restored, replug power cord to AC outlet.

Vacation and Moving Care

•For long vacations or absences, unplug the wine & beverage center and clean the door gaskets according to “General cleaning” section. Leave doors open, so air can circulate inside.

•When moving always move the wine & beverage center vertically. Do not move with the unit lying down, as possible damage to the sealed system could occur.

Note: After moving, wait for 24 hours before plugging in the

9wine & beverage center.