This section provides procedures for the checkout and replace- ment of the various parts used within the fryer. Before replac- ing any parts, refer to the Troubleshooting section. It will aid you in determining the cause of the malfunction.
This section is arranged in groupings of the components that work together within the fryer. The general groups are listed below.
Removing the Control Panel
Probe
Electrical Components
Control Board
Pressure System
1.You may want to use a multimeter to check the electric components.
2.When the manual refers to the circuit being closed, the multimeter should read zero unless otherwise noted.
3.When the manual refers to the circuit being open, the multimeter will read infinity.
4.The weights can be removed from the frame to easily access the rear of cooker.
The following electrical components are described in this section.
1.High Limit
2.Fuse Holders
3.Power/Pump Switch
4.Contactors
5.Heating Elements
6.Temperature Probe
7.Complete Control Panel Henny Penny