Henny Penny
5-17. PRESSURE PAD
Model 580
The pressure pads are plastic strips that the lid cam presses against to seal the lid.
1.Raise the lid.
2.Remove the four screws securing the lid cover and remove cover.
3.Push the lid cam back, off of the pressure pads.
4. Using an Allen wrench, remove large bolt securing the pad.
5.Using a Phillips head screw driver, remove the small screw securing the pad and remove the broken pad.
NOTE
If the pressure pad is worn, but not broken, it can be reversed 180 degrees, and the other end of the pad used.
6. Install new pad in reverse order.
302 |