Hoshizaki KMS-1400MLH instruction manual How to Remove Panels

Page 12

C. How to Remove Panels

1.Icemaker

Front Panel: Remove the screw. Lift up and towards you.

Top Panel: Lift off.

Side Panel (R): Remove the screw. Slide forward slightly and lift off.

Insulation Panel: Remove the thumbscrews. Lift up slightly and pull towards you.

Top Panel

Side Panel (R)

Insulation Panel

Front Panel

Icemaker

Fig. 2

2. Condensing Unit

Top Panel: Remove the screws and lift off.

Front Panel: Remove the screws and lift off.

Left Side/Rear Panel: Remove the screws and lift off.

Louver Panel: Remove the screws and lift off.

Right Side Panel: Remove the screws and lift off.

Valve Box

Access Panel

Left Side/Rear Panel

Front Panel

Top Panel

Right Side Panel

Louver Panel

Condensing Unit

Fig. 3

12

Image 12
Contents KMS-1400MLH Hoshizaki AMERICA, INC Contents Specifications Nameplate Rating KMS-1400MLHCondensing Unit Model SRK-14H For Outdoor USE MOTOR-COMPRESSOR Thermally ProtectedIntentionally Left Blank Condensing Unit Model SRK-14H3Dimensions/Connections Condensing Unit Model SRK-14H/3 II. Installation and Operating Instructions LocationIcemaker Condensing Unit Icemaker Hoshizaki Condensing UnitChecks Before Installation How to Remove Panels Installation of the Icemaker SetupBin Control Installation Pump Drain Suction Pipe Hose Thumbscrews Slots Installation of the Condensing Unit Line SetFactory Line Set Installation Field Fabricated Line Set InstallationElectrical Connection Electrical Connection Wire Harness Connections Water Supply and Drain Connections See Fig IcemakerFinal Checklist Startup III. Cleaning and Maintenance Cleaning and Sanitizing InstructionsCleaning Procedure Page Maintenance Sanitizing Procedure Following Cleaning ProcedureStainless Steel Exterior Dispenser Unit/Storage Bin and ScoopPreparing the Icemaker for Long Storage Remove the water from the potable water supply line See FigPage Hoshizaki AMERICA, INC