Hoshizaki KMD-410MWH, KMD-410MAH instruction manual

Page 5

WARNING, continued

•The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be properly supervised around the appliance.

•Do not climb, stand, or hang on the appliance or allow children or animals to do so. Serious injury could occur or the appliance could be damaged.

•Do not use combustible spray or place volatile or flammable substances near the appliance. They might catch fire.

•Keep the area around the appliance clean. Dirt, dust, or insects in the appliance could cause harm to individuals or damage to the appliance.

NOTICE

•Protect the floor when moving the appliance to prevent damage to the floor.

•Follow the water supply, drain connection, and maintenance instructions carefully to reduce the risk of costly water damage.

•In areas where water damage is a concern, install in a contained area with a floor drain.

•Install the appliance in a location that stays above freezing. Normal operating ambient temperature must be within 45°F to 100°F (7°C to 38°C).

•Do not leave the appliance on during extended periods of non-use, extended absences, or in sub-freezing temperatures. To properly prepare the appliance for these occasions, follow the instructions in “III C. Preparing the Appliance for Periods of Non-Use.”

•Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

•Do not place objects on top of the appliance.

•The dispenser unit/ice storage bin is for ice use only. Do not store anything else in the dispenser unit/ice storage bin.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents KMD-410MAH KMD-410MWH Hoshizaki AMERICA, INC Contents Important Safety Information Page Specifications Electrical and Refrigerant Data Single Phase Model NumberKMD-410MAH Dimensions/ConnectionsKMD-410MWH How to Remove Panels See Fig II. Installation and Operating InstructionsChecks Before Installation Location Setup Bin Control Installation Bin Control Lead Bushing Page  Electrical ConnectionWater Supply and Drain Connections See , 10 or KMD-410MAH KMD-410MWHDrain Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Connection to a Closed Loop SystemFinal Checklist Startup Cleaning Procedure III. Cleaning and Maintenance InstructionsCleaning Page Float Switch Page Sanitizing Procedure Following Cleaning Procedure Stainless Steel Exterior MaintenanceStorage Bin and Scoop Air Filters air-cooled model onlyDrain the water tank Preparing the Icemaker for Periods of Non-UseRemove the water from the icemaker water supply line IV. Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 65 pages 49.57 Kb

KMD-410MWH, KMD-410MAH specifications

The Hoshizaki KMD-410MWH and KMD-410MAH are premier ice makers, designed for commercial establishments that require high-efficiency ice production. These units stand out for their advanced features and technology that cater to the diverse needs of restaurants, bars, and hotels.

One of the primary features of the KMD-410 lineup is its impressive ice production capacity. With a production rate of up to 410 pounds of cube ice in a 24-hour period, each model ensures a steady supply of ice, which is essential for businesses with high demand. The ice produced is in the form of clear, hard cubes, ideal for beverage cooling, cocktail preparation, and food presentation.

Both models showcase the unique Hoshizaki ice-making system, which employs a direct cooling method. This technology uses individual stainless steel evaporators to produce ice, resulting in more uniform cubes and less waste. The stainless steel construction contributes to the durability of the units, making them suitable for rugged commercial environments.

Energy efficiency is another hallmark of the KMD-410MWH and KMD-410MAH. These machines are designed with an energy-saving mode that reduces power consumption without compromising ice production. This is critical for businesses looking to minimize operational costs while maintaining high standards of service.

User convenience is prioritized in these models through features like the easy-to-clean design. The internal components can be accessed quickly, allowing for simpler maintenance and sanitation processes. Additionally, the built-in cleaning cycle aids in maintaining ice purity and preventing bacterial growth, which is essential for food safety.

The KMD-410MAH also includes an advanced monitoring system with indicators for water usage and ice levels. This feature allows operators to keep track of performance and make necessary adjustments, ensuring that the ice maker operates at peak efficiency.

For installation flexibility, both models can be paired with various storage bins and dispensers, adapting to the layout of any establishment. Furthermore, they can be equipped with optional filtration systems that enhance water quality, further improving the taste and clarity of the ice produced.

In summary, the Hoshizaki KMD-410MWH and KMD-410MAH ice makers are exemplary choices for any business that demands high-quality, reliable ice production. Their robust features, energy-efficient operation, and user-friendly design make them indispensable assets in the hospitality and foodservice industries.
Top Page Image Contents