Hoshizaki KMD-410MWH, KMD-410MAH instruction manual IV. Disposal

Page 29

5)Replace the front panel in its correct position.

6)Remove all ice from the dispenser unit/storage bin. Clean the dispenser unit/storage bin using a neutral cleaner. Rinse thoroughly after cleaning.

7)Close the icemaker water supply line drain valve.

3.On water-cooled model only, remove the water from the water-cooled condenser:

1)Turn off the power supply and remove the front panel.

2)Move the control switch on the control box to the “OFF” position.

3)Remove the top panel and right side panel.

4)Close the condenser water supply line shut-off valve. If connected to a closed loop system, also close the condenser return line shut-off valve. See Fig. 10 or 11.

5)Open the condenser water supply line drain valve. If connected to a closed loop system, also open the condenser return line drain valve.

6)Attach a compressed air or carbon dioxide supply to the condenser water supply line drain valve.

7)Open the water regulating valve by using a screwdriver to pry up on the spring retainer underneath the spring. While holding the valve open, blow out the condenser using the compressed air or carbon dioxide supply until water stops coming out.

Note: Be sure to close the water regulating valve as before.

8)Close the condenser water supply line drain valve. If connected to a closed loop system, also close the condenser return line drain valve.

9)Replace the top, right side, and front panels in their correct positions.

IV. Disposal

The appliance contains refrigerant and must be disposed of in accordance with applicable national, state, and local codes and regulations. Refrigerant must be recovered by properly certified service personnel.

IMPORTANT

The insulation foaming agent used for the unit body contains flammable gas cyclopentane. With this in mind, dispose of the product properly.

28

Page 28 Page 30
Image 29
Page 28 Page 30
Contents KMD-410MAH KMD-410MWH Hoshizaki AMERICA, INC Contents Important Safety Information Page Specifications Electrical and Refrigerant Data Single Phase Model NumberKMD-410MAH Dimensions/ConnectionsKMD-410MWH How to Remove Panels See Fig II. Installation and Operating InstructionsChecks Before Installation Location Setup Bin Control Installation Bin Control Lead Bushing Page  Electrical ConnectionWater Supply and Drain Connections See , 10 or KMD-410MAH KMD-410MWHDrain Connection to an Open Drain System Water-Cooled CondenserConnection to a Closed Loop System Connection to a Closed Loop SystemFinal Checklist Startup Cleaning Procedure III. Cleaning and Maintenance InstructionsCleaning Page Float Switch Page Sanitizing Procedure Following Cleaning Procedure Stainless Steel Exterior MaintenanceStorage Bin and Scoop Air Filters air-cooled model onlyDrain the water tank Preparing the Icemaker for Periods of Non-UseRemove the water from the icemaker water supply line IV. Disposal Hoshizaki AMERICA, INC
Related manuals
Manual 65 pages 49.57 Kb

KMD-410MWH, KMD-410MAH specifications

The Hoshizaki KMD-410MWH and KMD-410MAH are premier ice makers, designed for commercial establishments that require high-efficiency ice production. These units stand out for their advanced features and technology that cater to the diverse needs of restaurants, bars, and hotels.

One of the primary features of the KMD-410 lineup is its impressive ice production capacity. With a production rate of up to 410 pounds of cube ice in a 24-hour period, each model ensures a steady supply of ice, which is essential for businesses with high demand. The ice produced is in the form of clear, hard cubes, ideal for beverage cooling, cocktail preparation, and food presentation.

Both models showcase the unique Hoshizaki ice-making system, which employs a direct cooling method. This technology uses individual stainless steel evaporators to produce ice, resulting in more uniform cubes and less waste. The stainless steel construction contributes to the durability of the units, making them suitable for rugged commercial environments.

Energy efficiency is another hallmark of the KMD-410MWH and KMD-410MAH. These machines are designed with an energy-saving mode that reduces power consumption without compromising ice production. This is critical for businesses looking to minimize operational costs while maintaining high standards of service.

User convenience is prioritized in these models through features like the easy-to-clean design. The internal components can be accessed quickly, allowing for simpler maintenance and sanitation processes. Additionally, the built-in cleaning cycle aids in maintaining ice purity and preventing bacterial growth, which is essential for food safety.

The KMD-410MAH also includes an advanced monitoring system with indicators for water usage and ice levels. This feature allows operators to keep track of performance and make necessary adjustments, ensuring that the ice maker operates at peak efficiency.

For installation flexibility, both models can be paired with various storage bins and dispensers, adapting to the layout of any establishment. Furthermore, they can be equipped with optional filtration systems that enhance water quality, further improving the taste and clarity of the ice produced.

In summary, the Hoshizaki KMD-410MWH and KMD-410MAH ice makers are exemplary choices for any business that demands high-quality, reliable ice production. Their robust features, energy-efficient operation, and user-friendly design make them indispensable assets in the hospitality and foodservice industries.
Top Page Image Contents