Franke Consumer Products FTU 3807 I installation instructions Metal grease filters, Alarm reset

Metal grease filters

Filters can be washed in the dishwasher. They need to be washed when FF-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood.

Alarm reset

•Switch off the hood and the lights. If the 24h-function has been activated this has to be deactivated.

•Press the E-key till the display is unlit.

Cleaning the filters

•Pull the comfort panels to open them.

•Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards.

•Any kind of bending of the filters must be avoided when wash- ing them. Before fitting them again into the hood make sure that they are completely dry. (The color of the filter surface may change throughout the time but this has no influence to the filter efficiency).

•When fitting the filters into the hood pay attention that they are mounted in correct position the handle facing outwards.

•Close the comfort panel.

EN	1
	15