Vulcan-Hart GCO2C ML-114571 Installation Codes and Standards, United States of America, Canada

Page 4

INSTALLATION CODES AND STANDARDS

In the United States of America:

1.State and local codes.

2.National Fuel Gas Code, ANSI/Z223.1/NFPA #54 (latest edition). Copies may be obtained from The American Gas Association, Inc., Accredited Standards Committee Z223 @ 400 N. Capital St. NW, Washington, DC 20001 or the Secretary Standards Council, NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471.

NOTE: In the Commonwealth of Massachusetts,

All gas appliances vented through a ventilation hood or exhaust system equipped with a damper or with a power means of exhaust shall comply with 248 CMR.

3.Vapor Removal From Cooking Equipment, NFPA-96 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02169-7471.

4.National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02169-7471.

In Canada:

1.Local codes.

2.CSA B149.1 Natural Gas and Propane Installation Code.

3.CSA C22.1 Canadian Electric Code (latest edition).

The above are available from the Canadian Standard Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.

INSTALLING BASIC OVEN

The basic oven must be installed on 4" (10 cm) or 6" (15 cm) adjustable legs for counter installation or be mounted on a modular stand. Installations on concrete bases or other supports restricting air circulation underneath the oven are not advisable and may void the warranty.

Ovens Mounted on Casters

Ovens mounted on casters must use a flexible connector (not supplied by Vulcan) that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 • CSA 6.16 and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI-Z21.41 • CSA 6.9. In addition, adequate means must be provided to limit movement of the appliance without depending on the connector and the quick-disconnect device or its associated piping to limit appliance movement. Attach the restraining device at the rear of the oven as shown in Fig. 1.

CONNECT

GAS LINE STRAIN RELIEF HERE

Fig. 1

PL-53563

If disconnection of the restraint is necessary, turn off the gas supply before disconnection. Reconnect this restraint prior to turning the gas supply on and returning the oven to its installation position.

Separate instructions for installing casters to the oven are included with the casters.

Note: If the oven is installed on casters and is moved for any reason, it is recommended that the oven be releveled front to back and side to side for even baking.

– 4 –

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Important for Your Safety For Your SafetyInstallation GeneralKeep this Manual for Future Reference UnpackingInstallation Codes and Standards Installing Basic OvenUnited States of America CanadaAssembling the Legs to the Single Oven Assembling the Chimney to the Single OvenAssembling the Oven to the Stand Assembling Stacked OvensLeveling Electrical ConnectionsTesting the GAS Supply System Burner AIR Shutter AdjustmentsGAS Connection GAS Pressures and OrificesFlue Connection OperationControls Model GCO2D Fig Lighting the GCO2D Oven Using the GCO2D OvenBefore First USE Thermostat Control Controls Model GCO2C Built before October 1999 FigRoast Button Timer ControlTime Display Colon Gentle Bake Mode On / Off / Oven Cool SwitchGentle Bake Button Stop / Start ButtonUsing the GCO2C Oven Error Messages Model GCO2CControls Model GCO2C Built after October Menu SelectManually Setting the Temperature and Cook Time Setting the Oven for Roast & Hold Roast and Hold Operation GCO2C Oven Proper UtensilsConserving Energy Operating HintsOptional Stainless Steel Oven Interior CleaningSuggested Cooking Guidelines Models GCO2D and GCO2C For Best Results Meat & Fish ProductsMaintenance Troubleshooting

GCO2D ML-114569, GCO2C ML-114571 specifications

Vulcan-Hart is renowned for its high-quality commercial kitchen equipment, and the GCO2C ML-114571 and GCO2D ML-114569 models are no exception. These gas-fired convection ovens stand out in the market due to their innovative technologies and robust features designed to enhance the cooking experience in busy kitchens.

The GCO2C ML-114571 is a two-deck convection oven that offers exceptional versatility and efficiency. With an impressive capacity to accommodate multiple pans, this model is ideal for baking, roasting, and even braising. Its unique heating system ensures even heat distribution throughout the oven chamber, which results in consistent cooking results. This is further supported by its adjustable airflow system, allowing chefs to customize the cooking environment based on their recipe requirements.

On the other hand, the GCO2D ML-114569 takes the efficiency of convection cooking to another level with its double-deck design. This feature allows for maximal use of vertical space, making it perfect for kitchens where space is a constraint. Like its counterpart, it boasts a strong heating system and digital controls that allow for precise temperature adjustments and programmable cooking times. The GCO2D is particularly favored for its user-friendly interface, which simplifies the cooking process for even the most complex dishes.

Both models are equipped with durable stainless steel construction, making them resistant to wear and tear in a high-volume cooking environment. The interiors are designed with smooth surfaces for easy cleaning and maintenance, crucial for adhering to health and safety standards in commercial kitchens. Furthermore, the oven doors are designed with triple-pane glass, providing excellent insulation and visibility while minimizing heat loss.

The advanced control panels on both models feature intuitive knobs and buttons, allowing for easy temperature and timer adjustments. Some versions even include programmable settings to streamline the cooking process. The GCO2C ML-114571 and GCO2D ML-114569 also offer energy-efficient operation, helping kitchens reduce their overhead costs while maintaining high performance.

Overall, the Vulcan-Hart GCO2C ML-114571 and GCO2D ML-114569 are exemplary choices for any commercial kitchen seeking reliable, multifunctional, and efficient cooking solutions. Their combination of rugged construction, advanced technology, and user-oriented features ensures that chefs can create high-quality dishes with ease and confidence.
Top Page Image Contents