How to Set the Oven When Using the Temperature Probe
The display will flash “PROBE” and the oven control will signal if the probe is inserted into the outlet, but the oven is not programmed for the probe.
Your double oven has controls for the upper oven and the lower oven. Be sure to set the correct control. Pads on the left side of the panel are for the upper oven. Pads on the right side of the panel are for the lower oven. The TIMER ON/OFF, COOK TIME, STOP TIME, INCREASE and DECREASE pads can be used for either oven.
1.Insert the probe into the meat.
2.Plug the probe into the outlet on the oven wall. Make sure it’s pushed all the way in. Close the oven door.
(—)3. Press the PROBE pad.
PROBE
4.Press the INCREASE or DECREASE pad until the desired internal probe temperature is displayed.
5. Press the BAKE pad.
(
LBAKE--J
6.Press the INCREASE or DECREASE Dad. The last oven set temperature appears in th~ display. Continue pressing until the desired oven temperature is displayed.
The oven will start automatically. The words “BAKE ON” and the roasting temperature you set will be in the display.
After a few seconds, the words “LO PROBE” will replace the roasting temperature in the display. After the internal temperature of the meat reaches 100”F., the changing internal temperature will be shown in the display.
7. When the internal temperature of the
ElCLEAR meat reaches the number you have set, the probe and the oven turn off
OFF and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on
CAUTION: To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled. Do not store the probe in the oven.
NOTE:
_ If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.
●A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.
●You can use the timer even though you cannot use timed oven operations.
To change the oven temperature during the Roast cycle, press the BAKE pad and then the INCREASE or DECREASE pad to get the new temperature.