How to Set Oven for Cleaning
Quick Reminder:
1.Prepare the oven for cleaning.
2.Close the oven door completely.
3.Press the CLEAN pad.
4.Press the INCREASE or DECREASE pad until the desired Clean Time appears.
If the oven is too hot and you start to set a clean cycle, the word “OFF” will appear in the display. Allow additional time for cooling before you try to set the cycle.
NOTE: Only one oven at a time can be
1.Follow the directions to prepare the oven for cleaning.
|
| ~ 2. Press the CLEAN pad. | |
f | |||
|
CLEAN
3.Press the INCREASE or DECREASE pad until the desired Clean Time
is displayed.
Clean Time is normally 3 hours. You can change the Clean Time to anytime between 2 and 4 hours, depending on the amount of soil in your oven.
The
4.When the LOCK light is off, open the door. NOTE:
●The word “door” will be displayed, the word “LOCK” will flash and oven control will signal if you set the clean cycle and forget to close the oven door.
A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.
|
| ● You can find out when the clean cycle |
| ||
|
| |
STOP |
| will be finished by pressing the STOP |
TIME |
| TIME button. |
|
| |
|
|
|
|
|
|
To Stop a Clean Cycle
❑CLEAR 1. Press the CLEAIVOFF pad.
OFF
2.Wait until the oven has cooled below locking temperature. You will not be able to open the door right away unless the oven is below the locking temperature.
(continued next page)
31