Instructions
Using the self-cleaning oven. (on some models)
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Operating Instructions Safety
or
(depending on model)
or
(depending on model)
How to Delay the Start of Cleaning
Press the Self Clean pad once for a
A
If a time other than 4 hours or
3 hours is needed, use the number pads (on some models) or the Hour and Min + or – pads (on some models) and enter the desired clean time.
You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.
Press the Delay Start pad.
The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light goes off.
When the LOCKED light goes off, you will be able to open the door.
NOTE: On models with press pad controls for both ovens, you can set a delay clean in both ovens at the same time. The second oven set will automatically delay the start of cleaning until the end of the first oven’s clean cycle.
To recall the start time of the second oven set, press the Delay Start pad on the controls for the second oven.
Care and Cleaning
Using the number pads (on some models) or the Hour and Min + or – pads (on some models), enter the time of day you want the clean cycle to start.
Press the Start pad.
Consumer Support Troubleshooting Tips
After a Clean Cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
■If the racks become hard to slide, wipe the rack supports with cooking oil.
16