ge.com
Changing the Speed of the + or – Pads (on some models)
Safety
+
or
As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below.
Press the Bake and Broil Hi/Lo pads (on double oven models, use the upper oven controls) at the same time for 3 seconds, until the display shows SF.
Press any + pad. The display will show you a set speed between 1 and 5.
Press any + pad to increase the speed up to the number 5.
Press any – pad to decrease the speed down to the number 1.
Press Start to activate the setting and leave the control set in this special features mode.
Instructions Operating
Auto Recipe™ Conversion (on some models)
+ | When using convection bake, the Auto Recipe™ |
| |
| Conversion feature will automatically convert |
| entered regular baking temperatures to |
| convection baking temperatures. |
Once the feature is activated, the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the Start pad, the display will show CON and the converted temperature of 325°F.
NOTE: This feature does not convert convection bake cooking times, only regular baking temperatures.
To activate the feature:
Press the Bake and Broil Hi/Lo pads (on double oven models, use the upper oven controls) at the same time for 3 seconds, until the display shows SF.
Press the Convection Bake pad. The display will show CON OFF. Press the Convection Bake pad again. The display will show CON ON.
Press the Start pad.
To deactivate the feature, repeat steps
Instructions Care and Cleaning
or
(depending on model)
Control Lockout
Your control will allow you to lock out the press pads so they cannot be activated when pressed.
NOTE: On double ovens with press pad controls for both ovens, this activates this feature for both ovens.
To lock/unlock the controls:
Press the Hour and Min – pads or the 9 and 0 pads (depending on model) at the same time for 3 seconds until the display shows
LOC ON.
To unlock the control, press the Hour and Min – pads or the 9 and 0 pads (depending on model) at the same time for 3 seconds until the display shows LOC OFF.
When this feature is on and the press pads are pressed, the control will beep and the display will show LOC ON.
■The control lockout mode affects all press pads. No press pads will work when this feature is activated.
■On models with oven knob(s), this feature is not available for the lower oven.
■This adjustment will be retained in memory after a power failure.
Troubleshooting Tips Consumer Support
19