GE 49-60021-2 About storage drawer removal, About the refrigerator doors, Drawer Removal

SafetyInstructions

About storage drawer removal.

Not all features are on all models.

Operating Instructions

Drawer

Guides

When replacing the drawers, make sure you slide them through both drawer guides on the right side.

Drawer Removal

Drawers can easily be removed by tilting up slightly and pulling past the stop location.

Remove the door bins from the fresh food door before removing the drawer.

To remove the shelf above the top drawer, first remove the top drawer and any food on the shelf. Then tilt the shelf up at the front and lift it up and out of the tracks.

To replace the shelf, raise the shelf front slightly and place the top hooks in the lowest large track slots. Then lower the front of the shelf until it is level.

To remove the drawers when the fresh food compartment door cannot be opened fully you need to roll the refrigerator forward until the door can be fully opened. In some cases this will require moving the refrigerator to the left as you roll it out.

About the refrigerator doors

TroubleshootingTips InstallationInstructions

CustomerService

Refrigerator Doors

The refrigerator doors may feel different than the ones you are used to. The special door opening/closing feature makes sure the doors close all the way and are securely sealed.

When opening and closing the door you will notice a stop position. If the door is opened past this stop point, the door will remain open to allow you to load and unload food more easily. When the door is only partially open it will automatically close.

When the door is only partially open it will automatically close.

Beyond this stop the door will stay open.

The resistance you feel at the stop position will be reduced as the door is loaded with food.

12