GE 49-60021-2 Troubleshooting Tips, Before You Throw Away Your Old Refrigerator or Freezer

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not allow anyone to climb, sit, stand or hang on the Refreshment Center door. They could damage the refrigerator and maybe even tip it over, causing severe personal injury.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Turning the control to the OFF or position does not remove power to the light circuit.

Do not refreeze frozen foods which have thawed completely.

Operating Instructions Installation Instructions

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous…even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

Take off the doors.

Leave the shelves in place so that children may not easily climb inside.

CFC Disposal

Your old refrigerator has a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone.

If you are throwing away your old refrigerator, make sure the CFC refrigerant is removed for proper disposal by a qualified servicer. If you intentionally release this CFC refrigerant you can be subject to fines and imprisonment under provisions of environmental legislation.

Troubleshooting Tips

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States) or a CSA certified (in Canada), 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

3

Customer Service

Image 3
Contents Manuel d’utilisation Manual del propietarioPart No D9617P008 Pub. No -60021-2 11-99 JR GE & You, a Service Partnership Customer ServiceCongratulations You Are Now Part of the GE Family CFC Disposal Troubleshooting TipsOperating Instructions Installation Instructions Before You Throw Away Your Old Refrigerator or FreezerTroubleshootingTips CustomerServiceOperatingInstructions To test the freezer Testing and Adjusting TemperaturesAbout the controls on the refrigerator Freezer Control Fresh FoodR M a L Monitor and Diagnostic SystemHow to Set the Door Alarm SafetyTips Customer Service When Your Refrigerator Is First PluggedWhat the Codes Mean Filter Bypass Plug Installing the Filter CartridgeAbout the water filter cartridge About the shelves and basketsAbout the refrigerator bins and dishes TroubleshootingTips CustomerServiceAbout the storage drawers Safety Instructions OperatingRefrigerator Doors About storage drawer removalAbout the refrigerator doors Drawer RemovalAbout the refreshment center Refreshment Center Compartment stores frequently used itemsBottom of Frame To Use the Dispenser About the automatic icemakerAbout the ice and water dispenser Automatic IcemakerTo replace Ice Storage BinImportant Facts About Your Dispenser To removeCleaning the Decorator Door Panels Care and cleaning of the refrigeratorCleaning the Outside Cleaning the InsideUnder the Refrigerator Troubleshooting Tips Preparing to MoveInstructions Installation Instructions Behind the RefrigeratorReplacing the light bulbs TroubleshootingTips InstallationInstructionsLeveling Rollers Preparing to install the refrigeratorRefrigerator Location Clearances24″ Door Alignment24″ Cabinet 701/4″ 36″ Water Electrical ″ Airspace Wall Plates 25″ 24″ Side PanelsHandle Side 19 mm Appearance PanelRefrigerator Door Trim kits and decorator panelsPanels less than 1/4″ 6 mm thick ″ 19 mm or Raised PanelWith Refreshment Center Dimensions for Custom Wood PanelsTrim kits Freezer PanelTighten the two screws on the Top Trim to 30 in-lbs torque Inserting the door panelsLoosen the Top Trim on the Freezer and Fresh Food Doors Insert the Freezer Panel and Fresh Food PanelInstall the Side Trim Secure the Side TrimTop Trim Side Tape Liner Bottom Trim Top Trim Screws Bracket Screws Buttons Slots Installing the HandlesRemoving the Handles Inserting the Door PanelsWhat You Will Need Installing the water linePower drill Before You BeginInstructions Installation Shut Off the Main Water SupplyOperating Refrigerator Connection ″ Copper Tubing Connect the Tubing to the RefrigeratorStart the Icemaker Compression NutNormal operating sounds Before you call for service…Operating Instructions Installation Instructions Problem Possible Causes What To DoOn frozen food Fresh food or freezerCompartment too warm Frost or ice crystalsWater spurting from Cube dispenser doesNot work Water dispenser doesRefrigerator Hot air from bottomWhat GE Will Not Cover Safety Instructions Operating Instructions InstallationInstructions GE Will ReplaceNSF International Standards Operating SpecificationsGeneral Installation/Operation/Maintenance Requirements Special NoticesTurbidity Contaminants State of California Department of Health ServicesTrademark/Model Designation Replacement Elements Microbiological ContaminantsCustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Page Félicitations Désormais vous faites partie de la famille GE GE et vous, un partenariat de serviceDe dépannage Service La clientèleSe débarrasser du CFC Conseils de dépannage Raccordement ÉlectriqueLes commandes du réfrigérateur Réglage des commandesMesures de sécurité Installation Service à la clientèle Conseils de dépannage Système de contrôle et de diagnosticPourquoi le voyant Warm Temp température élevée s’allume Comment régler l’alarme des portesDe sécurité MesuresFonctionnement du système de contrôle et de diagnostic System CHECK-RESET vérification etSignification des codes Dépannage La cartouche du filtre à eauLes clayettes et les paniers MesuresLes balconnets et les récipients Service à la clientèleLes bacs de rangement Conseils de dépannage Service à la clientèlePortes du réfrigérateur Enlèvement des bacs de rangementLes portes du réfrigérateur Enlèvement des bacsLe Centre de rafraîchissements Pour utiliser le distributeur Machine à glaçons automatiqueLe distributeur d’eau et de glaçons Machine à glaçons automatiqueRemise en place Bac à glaçonsRenseignements importants concernant votre distributeur Retrait du bacEntretien et nettoyage du réfrigérateur SécuritéMesures de Déménagement Derrière le réfrigérateurSous le réfrigérateur Départ en vacancesCompartiment congélateur-modèles avec distributeur Remplacement des ampoulesCompartiment réfrigérateur-lampe supérieure Compartiment congélateur-modèles sans distributeurDégagements Emplacement du réfrigérateurPréparation Alimentation en eau de la machine à glaçonsDimensions et spécifications pour les modèles «CustomStyle» La clientèle Conseils de dépannageAlignement des portes Panneau de 3/4 po 19 mm ou surélevé Ensembles de moulures et de panneaux décoratifsAvant de commencer Panneaux de moins de 1/4 po 6 mm d’épaisseurDimensions pour les panneaux de bois sur mesure Ensembles de mouluresDe dépannage Insérez les panneaux du congélateur et du réfrigérateur Installation des panneaux de porteMoulure inférieure Installez la moulure latéraleFixez la moulure latérale Moulure SupérieureVis de la moulure supérieure Vis du support Support Boutons Installation des panneaux de porteInstallation des poignées Enlèvement des poignéesInstallation de la conduite d’eau Matériel nécessairePerceuse électrique Mesures de sécurité Installez le robinet d’arrêtConseils de Ouvrez le robinet et rincez le tuyauMettez la machine à glaçons en marche Mesures de FonctionnementOuvrez le robinet d’arrêt de la conduite d’eau principale Branchez le réfrigérateurAvant d’appeler un réparateur… Sécurité Fonctionnement InstallationDe dépannage Service à la clientèle Bruits de fonctionnement normauxMesures Fonctionnement Mesures de sécurité Fonctionnement Installation Air chaud à la base du Du congélateurLa porte ne se referme Pas entièrementGarantie DU Client Numéros de service Un service satisfaisantPour les besoins particuliers Aux États-Unis Normes internationales NSF Exigences générales d’installation/opération/entretienSpécifications d’opération Avis spéciauxGE y usted, una asociación de servicio ¡Felicidades Ahora usted es parte de la familia GEAntes de deshacerse de su viejo refrigerador o congelador Solucionar problemas ServicioAl consumidor InstalaciónComo Conectar LA Electricidad Solucionar problemasLos controles del refrigerador El ajuste de los controlesSeguridad Monitor electrónico y sistema de diagnóstico Instalación Servicio al consumidor Solucionar problemasNormal brilla Cómo fijar la alarma de la puertaAl enchufar por primera vez su refrigerador Por qué brilla la luz de Warm Temp temperatura elevadaAl oprimir System CHECK-RESET Cómo funciona el monitor y el sistema de diagnósticoSignificado de los códigos Tapón de derivación del filtro El cartucho del filtro de aguaEntrepaños y canastas Instalar el cartucho del filtroEl sistema Quick ServeTM Recipientes y fuentes del refrigeradorEntrepaño ajustable Portavinos detachableGaveta convertible para carnes Gavetas para guardarGavetas para guardar Gavetas con humedad ajustablePuertas del refrigerador Sacar la gaveta para guardarPuertas del refrigerador Como sacar las gavetasEl centro de refrescos Para usar el dispensador El dispositivo automático para hacer hieloEl dispensador de agua y de hielo Dispositivo automático para hacer hieloPara sacar Solucionar problemas Servicio al consumidorEl recipiente de almacenamiento de hielo Datos importantes de su dispensadorLimpiar el interior Cuidado y limpieza del refrigeradorLimpiar el exterior Limpiar los paneles de decoración de las puertasPreparación para vacaciones Solucionar problemasAtrás del refrigerador Debajo del refrigeradorCongelador-modelos sin dispensador de hielo ProblemasReemplazo de bombillas Compartimiento de alimentos frescos-Luz superiorEspacios libres Preparación para instalar el refrigeradorSuministro de agua al dispositivo para hacer hielo Ubicación del refrigeradorAlineación de las puertas Dimensiones y especificaciones para modelos de CustomStyleConsumidor Solucionar problemas Servicio alPanel de 3/4 ″ 19 mm o panel levantado Molduras y paneles decorativosAntes de que empiece Paneles de menos de 1/4 ″ 6 mm de espesorCon dispensador MoldurasCuidado de los paneles precortados Sin dispensador Congelador Alimentos frescosMoldura superior Corte ProblemasCómo insertar los paneles de la puerta Tornillos de laMoldura inferior Instalación de la moldura lateralAsegure la moldura lateral Moldura SuperiorTornillos de la moldura superior Remoción de las manijasInserción de los paneles de la puerta Instalación de la manijasInstalación de la línea de agua Lo que se necesitaTaladro eléctrico Corte el paso de agua del abastecimiento principal Instale la llave de pasoHaga pasar el tubo de cobre y conéctelo a la llave de paso Enchufe el cable eléctrico del refrigerador Servicio al consumidor SolucionarConecte el tubo de cobre al refrigerador Abra el agua en la llave de pasoSeguridad Sonidos normales de la operaciónAntes de solicitar un servicio… Operación InstalaciónCálido Compartimiento deAlimentos frescos o Congelador demasiadoSeguridad Operación Instalación Aire caliente a la base La puerta no se cierreCorrectamente o sólo ParcialmenteDurante GE reemplazará Lo que GE no cubriráGarantidor General Electric Company. Louisville, KY Números de servicio Especificaciones de Operación Avisos EspecialesEstándares Internacionales NSF Service Satisfaction Service Telephone Numbers

24 CustomStyle, 162D9617P008, 49-60021-2 specifications

The GE 49-60021-2, also known by its part number 162D9617P008, is a standout appliance in the realm of modern kitchen technology. This CustomStyle refrigerator exemplifies GE's commitment to innovation, performance, and user-friendly features.

One of the main highlights of the GE 49-60021-2 is its customizable design. This appliance is built to integrate seamlessly into your kitchen's existing decor, thanks to its CustomStyle feature. Homeowners can enjoy a sleek appearance, as the model is engineered to accept custom cabinet panels that blend perfectly with cabinetry. This means that the refrigerator can be tailored to fit the aesthetic of any kitchen, offering a harmonious look that does not compromise on functionality.

When it comes to storage capacity, this model does not disappoint. It provides ample space that makes it an ideal choice for families and cooking enthusiasts alike. The adjustable shelves and bins allow users to organize food items efficiently, making it easy to locate ingredients. The interior is well-lit with bright LED lighting, making it simple to spot even the smallest items.

The GE 49-60021-2 is equipped with advanced cooling technologies designed to maintain optimal freshness. Its multi-air flow system ensures that cool air is distributed evenly throughout the refrigerator, eliminating hot spots. In addition, this model features a temperature management system that monitors and adjusts the temperature to keep food at peak freshness.

Energy efficiency is another prominent feature of the GE 49-60021-2. This refrigerator is designed to meet or exceed energy standards, making it not only an eco-friendly choice but also a cost-effective one. The Smart Home technology embedded in this model allows users to manage and monitor energy usage through connected apps, leading to better energy consumption habits and savings over time.

In terms of convenience, the GE 49-60021-2 includes various user-friendly features. The water and ice dispenser is conveniently located on the exterior, providing easy access to chilled water and ice. Additionally, the built-in Wi-Fi connectivity allows users to connect their appliances to smart home systems for remote monitoring and control, enhancing the overall user experience.

In summary, the GE 49-60021-2,162D9617P008,24 CustomStyle refrigerator seamlessly blends innovative technology with customizable design. With its spacious interior, advanced cooling systems, energy efficiency, and smart features, this model stands as a prime choice for anyone looking to upgrade their kitchen with functionality and style.