Philips MX-980D, MX960D English Display, Speaker diagram, Status lights, Information area

DISPLAY

English

Display

The display of the receiver is divided into 4 sections, which are to be used for the following:

Speaker diagram

A rectangle with a letter in it shows that a speaker has been selected in the setup menu. However, the subwoofer indicator will only light when a subwoofer signal is available. If only a letter is shown, this speaker is not used and its sound is being reproduced by the other speakers.

.....virtual surround sound

SURROUND	surround sound is reproduced
DIGITAL SURROUND ....	digital surround sound is reproduced
L, R	front left and right speaker
C	center speaker
SL, SR	surround speakers
SW	subwoofer
Menu indication

These signs show you if the menu is on or off and indicate in which direction you may move.

MENU	.......................Menu is on.
1	You may move backwards to the previous
	menu topic using 1 PREV. / EXIT (“left”
	key on the remote control).
3	You may move up in an option list using
	X MENU NAVIGATOR (“up” key on the
	remote control).

4	.............................You may move down in an option list
	using X MENU NAVIGATOR (“down” key
	on the remote control).
2	You may move forward to the next menu
	topic using NEXT 2 (“right” key on the
	remote control).
OK	.............................You may confirm the displayed value.
		0
	ON/OFF

Status lights

Signs showing you various settings and information about the status of the receiver.

PRESET		Tuner is tuned to a preset radio station.
SENS HI		Tuner is switched to high sensitivity.
SENS	LO	Tuner is switched to low sensitivity.
CINEMA LINK ON		CINEMA LINK is active
STEREO		An FM station is being received in stereo.
SMART SOUND		One of the preset sound settings of the
		receiver is being used (FR 965, MX 960D
		only).
HALL		HALL effect is on.
ANA		Analog input is being used for the playing
		source.
NIGHT	.......................	NIGHT MODE is on.
COAX 1		Coaxial digital input COAX 1 is being
		used for the playing source.
COAX	2	Coaxial digital input COAX 2 is being
		used for the playing source.
DOWNMIX		Incoming multichannel signals are being
		reduced to fewer output signals
		(depending on the number of speakers).
OPT		Optical digital input OPTICAL IN is being
		used for the playing source (FR 965,
		MX 960D only).
OPT 1		Optical digital input OPTICAL 1 IN is
		being used for the playing source (FR 975,
		MX 980D only).
OPT 2	.......................	Optical digital input OPTICAL 2 IN is
		being used for the playing source (FR 975,
		MX 980D only).
LOUDNESS		LOUDNESS is switched on.

Information area

This area is used for feedback of the receiver, tuner frequencies, menu options, values and scrolling text messages.

GUIDE

MENUOK

É

A ATV

NEWS/TA Ç

16