Replacing the light bulbs. | GEAppliances.com |
Turning the control to the 0 (off) position does not remove power to the light circuit.
Safety
Refrigerator Lights
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
The bulbs are located at the top of the refrigerator compartment behind the controls. To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back.
Rotate the shield down and then forward to release the tabs at the front of the shield.
After replacing with an appliance bulb of the same or lower wattage, replace the shield.
Plug the refrigerator back in.
Instructions Operating Instructions
Appearance may vary
Freezer Light
CAUTION: Light bulbs may be hot.
Unplug the refrigerator.
The bulb is located at the top of the freezer inside a light shield. To remove the shield, grasp the shield at the back and pull out to release the tabs at the back.
Rotate the shield down and then forward to release the tabs at the front of the shield.
After replacing with an appliance bulb of the same or lower wattage, replace the shield.
Plug the refrigerator back in.
Installation Instructions Troubleshooting Tips Consumer Support
15