Installation Instructions
Refrigerator
Models 20 and 22
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com In Canada, call 1.800.361.3400 or Visit our Website at: geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT — Save these
instructions for local inspector’s use.
•IMPORTANT — Observe all governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the Consumer.
•Note to Consumer – Keep these instructions for future reference.
•Skill level – Installation of this appliance requires basic mechanical skills.
•Completion time – Refrigerator Installation 20 minutes
Water Line Installation
30minutes
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway, the refrigerator door and freezer drawer or door (depending on model) can be removed.
•To remove the refrigerator door, see Step 1 in the Reversing the Door Swing section.
•To remove the freezer drawer, see the Removing the Freezer Drawer section.
•To remove the freezer door, see Steps 2 and 3 in the Reversing the Door Swing section.
PREPARATION (cont.)
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.com (in Canada at geappliances.ca) or from Parts and Accessories, 800.626.2002 (In Canada 1.888.261.3055).
TOOLS YOU MAY NEED
3/8″ Head Socket Driver
Adjustable Wrench(a
1/4″ Outer Diameter |
| |
Compression Nut |
| |
and Ferrule (sleeve) | Phillips Head Screwdriver | |
(icemaker models only) | ||
|
16