Installation Instructions
REVERSING THE DOOR SWING (cont.)
11TRANSFER REFRIGERATOR DOOR HANDLE TO RIGHT
In order to correctly install the handle on the right side, place a small piece of masking tape near the top of the handle before removing.
AGrasp the handle tightly with both hands and slide the handle up (this may require some force). The keyhole slots on the back of the handle allow the handle to separate from the mounting screws.
Screws | Keyhole slots |
mounted | |
on door | on back of handle |
BUsing an adjustable wrench, remove the handle mounting screws.
CCarefully pry off the logo badge and plug button. Remove a layer of adhesive and backing to expose new adhesive. Install logo badge and plug button on left side.
DInstall the handle mounting screws on the right side.
11TRANSFER REFRIGERATOR DOOR HANDLE TO RIGHT (cont.)
EHolding the handle so the masking tape is at the bottom, align keyhole slots on the top and bottom of the back of the handle with the screws mounted on the front of the door. Press the handle against the door front, making sure that the screws go into the keyhole slots.
FGrasping the handle with both hands, press it firmly against the front of the door and slide the handle down. This may require some force.
Keyhole slots | Screws | |
mounted | ||
on back of handle | ||
on door | ||
|
28