Installation Instructions
4PUT THE REFRIGERATOR IN PLACE
Move the refrigerator to its final location.
5LEVEL THE REFRIGERATOR
The refrigerator can be leveled by adjusting the rollers located near the bottom hinges.
Rollers
Raise
Rollers have three purposes:
•Rollers adjust so the door closes easily
when opened about halfway. (Raise the front about 5/8″ [16 mm] from the floor.)
•Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble.
•Rollers allow you to move the refrigerator away from the wall for cleaning.
To adjust the rollers:
•Turn the roller adjusting screws
clockwise to |
|
raise the |
|
refrigerator, |
|
counterclockwise |
|
to lower it. Use a |
|
3/8″ hex socket |
|
or wrench, or an |
|
adjustable |
|
wrench. | Roller adjusting screw |
|
6
A
B
LEVEL THE DOORS
Adjust the refrigerator door to make the doors even at the top.
To align:
Using a 7/16″ wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it.
NOTE:
A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.
After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.
Doors should be even at top
Raise
7/16″ wrench
23