Shut OFF the Main Water Supply | GE 200D2600P015 manual

Installation Instructions

WHAT YOU WILL NEED (CONT.)

•A GE water supply kit (containing tubing, shutoff valve and fittings listed below) is available at extra cost from your dealer or from Parts and Accessories, 800-626-2002 (in Canada 1.888.261.3055).

•A cold water supply. The water pressure must be between 20 and 120 p.s.i. (1.4–8.2 bar) on models without a water filter and between 40 and 120 p.s.i. (2.8–8.2 bar) on models with a water filter.

•Power drill.

•1/2″ or adjustable wrench.

•Straight and Phillips blade screwdriver.

•Two 1/4 ″ outer diameter compression nuts and

2 ferrules (sleeves)–to connect the copper tubing to the shutoff valve and the refrigerator water valve.

•If you are using a GE SmartConnect™ Refrigerator Tubing kit, the necessary fittings are preassembled to the tubing.

•If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. Do not cut formed end from GE SmartConnect™ Refrigerator tubing.

•Shutoff valve to connect to the cold water line.

The shutoff valve should have a water inlet with a minimum inside diameter of 5/32″ at the point of connection to the COLD WATER LINE. Saddle-type shutoff valves are included in many water supply kits. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes.

Install the shutoff valve on the nearest frequently used drinking water line.

1SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet long enough to clear the line of water.

2CHOOSE THE VALVE LOCATION

Choose a location for the valve that is easily accessible. It is best to connect into the side of a vertical water pipe. When it is necessary to connect into a horizontal water pipe, make the connection to the top or side, rather than at the bottom,

to avoid drawing off any sediment from the water pipe.

3DRILL THE HOLE FOR THE VALVE

Drill a 1/4″ hole in the water pipe (even if using a self-piercing valve) using a sharp bit. Remove any burrs resulting from drilling the hole in the pipe.

Take care not to allow water to drain into the drill. Failure to drill a 1/4″ hole may result in reduced ice production or smaller cubes.

200D2600P015 specifications

The GE 200D2600P015 is a versatile and highly reliable generator designed by General Electric, a leader in the field of power solutions. This generator stands out for its performance, efficiency, and advanced features, making it a popular choice for a variety of applications including industrial, commercial, and backup power generation.

One of the main features of the GE 200D2600P015 is its robust design, which ensures durability and longevity under demanding conditions. Built with high-quality materials, the generator is well-equipped to handle extreme temperatures and can operate effectively in various environmental settings. This durability minimizes maintenance needs, making it a cost-effective choice for users.

The generator is equipped with a powerful 200 kW output capacity, suitable for providing substantial power requirements. Its ability to deliver consistent and stable energy makes it ideal for critical facilities that cannot afford downtime, such as hospitals and data centers. The GE 200D2600P015 also incorporates advanced technologies that enhance its performance. One of these technologies is its intelligent control system, which optimizes fuel efficiency and operational performance. This results in reduced operating costs and lower carbon emissions, aligning with growing environmental standards.

In terms of fuel efficiency, the generator features multiple operational modes, allowing users to choose the most appropriate setting for their specific needs. This flexibility not only enhances usability but also supports various fuel types, giving users more options in sourcing energy.

Additionally, the GE 200D2600P015 is designed with an emphasis on safety, featuring multiple safety systems that ensure secure operation. These include automatic shutdown mechanisms and overload protection, which protect the generator and connected equipment from damage.

The compact design of the generator facilitates easy installation and transportation, making it a practical choice for settings where space is limited. Furthermore, the generator's user-friendly interface simplifies operation and monitoring, enabling even those with minimal technical knowledge to manage power generation effectively.

In summary, the GE 200D2600P015 stands out with its robust construction, powerful output, advanced technologies for fuel efficiency, and comprehensive safety features. This generator is an excellent solution for reliable and efficient power generation across diverse applications.