Troubleshooting Tips, Consumer Support

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

Instructions Operating Instructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with

a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

If the outlet is a standard 2-prong outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Installation

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

Troubleshooting Tips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

200D2600P015 specifications

The GE 200D2600P015 is a versatile and highly reliable generator designed by General Electric, a leader in the field of power solutions. This generator stands out for its performance, efficiency, and advanced features, making it a popular choice for a variety of applications including industrial, commercial, and backup power generation.

One of the main features of the GE 200D2600P015 is its robust design, which ensures durability and longevity under demanding conditions. Built with high-quality materials, the generator is well-equipped to handle extreme temperatures and can operate effectively in various environmental settings. This durability minimizes maintenance needs, making it a cost-effective choice for users.

The generator is equipped with a powerful 200 kW output capacity, suitable for providing substantial power requirements. Its ability to deliver consistent and stable energy makes it ideal for critical facilities that cannot afford downtime, such as hospitals and data centers. The GE 200D2600P015 also incorporates advanced technologies that enhance its performance. One of these technologies is its intelligent control system, which optimizes fuel efficiency and operational performance. This results in reduced operating costs and lower carbon emissions, aligning with growing environmental standards.

In terms of fuel efficiency, the generator features multiple operational modes, allowing users to choose the most appropriate setting for their specific needs. This flexibility not only enhances usability but also supports various fuel types, giving users more options in sourcing energy.

Additionally, the GE 200D2600P015 is designed with an emphasis on safety, featuring multiple safety systems that ensure secure operation. These include automatic shutdown mechanisms and overload protection, which protect the generator and connected equipment from damage.

The compact design of the generator facilitates easy installation and transportation, making it a practical choice for settings where space is limited. Furthermore, the generator's user-friendly interface simplifies operation and monitoring, enabling even those with minimal technical knowledge to manage power generation effectively.

In summary, the GE 200D2600P015 stands out with its robust construction, powerful output, advanced technologies for fuel efficiency, and comprehensive safety features. This generator is an excellent solution for reliable and efficient power generation across diverse applications.