( 1 ) Energy
Saver
Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights.Turn Energy Saver off and the icon goes off. The Energy Saver function automatically turns on when power is supplied to the refrigerator.
If condensation or water drops appear on the doors, turn the Energy Saver mode off.
( 5 ) Fridge
(Hold 3
sec for
Power
Cool)
Touch this button to set the fridge to your desired temperature.
You can set the temperature between 34°F and 46°F (or between 7°C and 1°C).
Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically
( 2 ) Freezer
(For example, if the door was left open).
(Hold 3 sec for Power Freeze)
Touch this button to set the Freezer to your desired temperature.
You can set the temperature between
( 6 ) Ice Off (Hold 3 sec for child lock)
If you don’t want to make more ice, touch this button. Also, pressing this button for 3 seconds locks the display panel and dispenser buttons so the buttons can not be used.The Child Lock icon lights up to indicate you’ve activated the Child Lock function. Press 3 seconds to unlock.
( 3 ) Alarm / |
Hold 3 |
sec for |
Filter |
Reset |
This button serves two purposes:
1) To turn the door open alarm on and off
If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes.
The beeping stops when you close the door. The door alarm function is
(7) Ice Type | Touch this button to select your desired | |
ice type. Cubed and crushed ice modes | ||
| ||
| alternate when you press the button. This | |
| ||
| mode can not be used with the Water mode | |
| simultaneously. | |
|
|
(8) Water | Touch this button to dispense water. This |
| mode can not be used with the Ice Type |
| mode simultaneously. |
| Water mode will be off if you Touch the Ice |
| Type button. |
|
|
2) To reset the water filter life indicator.
After you replace the water filter, touch and hold this button to reset the water filter life indicator.
Cooling Off Mode
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator's fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold.
( 4 ) Lighting/
Hold 3 sec for C↔F
Touching this button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously.
The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off. Touch and hold this button for 3 seconds to switch the temperature units between °C and °F
To start Cooling Off mode, touch and hold the Energy Saver button and the Power Freeze button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF.
To cancel Cooling Off mode, touch and hold the Energy Saver and the Power Freeze buttons again for 5 seconds.
12_ operating