
2
1
2.Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part ( 6 ) of the water line coupler.
| If a red clip is on the coupler, it must be |
|
caution | removed before removing the tube. |
|
| 4 |
|
Red Clip | 3 | |
(1/4") |
|
5
6
3.Pull and remove the hinge lever ( 7 ) . Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges ( 9 ).
left and right |
|
door hinges |
|
with a philips | 12 |
screwdriver (+). | 10 |
Remove the 2 | 11 |
| |
hex head bolts |
|
( 11 ) attached |
|
to the lower left | Allen wrench |
and right door |
|
hinges with an allen wrench (3/16”). Remove the | |
lower left and right door hinges ( 12 ). |
Reattaching the refrigerator doors
To reattach the fridge doors after you have moved the fridge to its final location, assemble parts in reverse order.
Disassemble the Flex door
1. Take out the Flex Zone ( 1 ) by lifting
it up. | 1 |
|
2. Take off the cover |
|
( 2 ) w/harness | 2 |
with a |
|
screwdriver |
|
p u 01setting
7
9
8
3. Disconnect the housing connector.
4. Lift the door straight up to remove.
5.Remove the screw ( 10 ) attached to the lower
4. Remove 2 hex head bolts from sides with a socket wrench (10mm).
5.Lift up the Flex door from
the rails.
setting up _07