ASSEMBLE THE FLEX DOOR
To reattach the flex doors after you have moved the fridge to its final location, assemble parts in reverse order.
Disassemble the freezer drawer
1. Take out the upper drawer by lifting it up.
2.Remove the freeze room guard ( 1 ) by lifting the guard up.
Adjusting the Level
Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.
How to adjust the level
Insert a
1
3. Take out the lower
basket ( 3 ) by3 lifting the basket
up from the rail system.
4.Remove 4 hex
head bolts from both sides with a socket wrench (10mm).
5.Lift up the freezer door from the rails.
Both control levers must be touching the floor
caution to avoid possible personal injury or property damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments wIth the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.
Assemble the freezer drawer
To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order.
Making minor adjustments between doors
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.
08_ setting up