If a power failure occurs, ice cubes may melt
caution then freeze together when the power comes back on, causing the dispenser to be out of
order.
To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water.
| After you dump the ice from the ice bucket, |
caution | you should press the dispenser lever once |
| with the ‘ICE |
| CUBED’ or |
| ‘CRUSHED’ |
| function ON. |
The ice maker will make new ice faster after you return the ice bucket to the freezer.
If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.
Using the ice off Function
When you select |
|
| |
the Ice Off mode, |
|
| |
remove all ice |
|
| |
cubes from the |
|
| |
bucket. If you are | PULL | PUSH | |
not using the ice | |||
|
|
dispenser, the ice cubes may clump together. Pull the lock lever forward to remove the bucket. Throw away the ice cubes or clumped ice. Push the bucket back until you hear a click.
Use only the ice maker provided with
caution the refrigerator. The water supply to this refrigerator must only be installed/connected
by a suitably qualified person. Connect to a potable water supply only.
To operate the ice maker properly, water pressure of 138 ~ 862Kpa is required.
If you have a long vacation or business trip and won’t use the water or ice dispensers for a long time:
-Close the water valve. Otherwise, water leakage may occur.
-Remove all food.
-Unplug the refrigerator.
-Wipe excess moisture from inside and leave
the doors open. Otherwise, odor and mold may develop.
Do not put your fingers, hands or any other unsuitable objects in the chute or
-It may result in personal injury or material damage.
Never put your finger or any other objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean it.
When you insert the Ice maker tray, be sure
caution that the tray is well centered at the entrance. Otherwise, the tray may be stuck.
Water clouding phenomenon
All water provided to the refrigerator flows through the core filter which is an alkaline water filter. In the filtering process, the pressure of the water that has flowed out of the filter is increased, and the water becomes saturated with oxygen and nitrogen. When this water flows out into the air, the pressure plummets and
the oxygen and nitrogen get supersaturated, which results in gas bubbles. The water may temporarily look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after dispensing ice or water. It comes back automatically. Ice is made in cubes. When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.
16_ Operating