. INSTALLATION OF THE COMBI – General Instructions
General Instructions:
1.Select the Combi’s operating location.
2.Complete the water, drain, and electric lines before positioning and leveling the Combi.
3.Position and level the Combi.
4.Connect the utility lines after positioning and leveling the Combi.
5.Call Cleveland Range at
6.After Setup and Performance Checkout, the Combi should provide years of reliable operation.
DANGER
Improper lifting can result in DEATH, INJURY, AND EQUIPMENT DAMAGE.
Use enough workers with training and experience lifting heavy equipment to place
Combis on supporting surfaces, and lift and handle Combis and acessories.
DANGER
Operating an out of level Combi can cause DEATH, INJURY, and EQUIPMENT DAMAGE.
Combis must be level both
NEVER operate an out of level Combi.
If a Combi is suspected to be out of level, shut it down at once and call you qualified
Cleveland Range authorized service agency at once.
WARNING
All clearance requirements above, below, and around the Combi are the same for non- combustible locations as for combustible locations.
Failure to maintain required clearances and additional distances as needed can result INJURY and EQUIPMENT DAMAGE.
Consult manufacturers’ literature, and sales and service agencies as needed.
5