Electrical Connection

I N S T A L L A T I O N

This appliance is equipped with a three-prong grounding plug. For your protection against shock hazard this appliance should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

Plug the unit into a properly grounded receptacle ONLY, positioning the unit so that the plug is easily accessible in case of an emergency. Arcing will occur when connecting or disconnecting the unit unless all controls are in the “off” position.

Proper receptacle or outlet configuration or permanent wiring for this unit must be installed by a licensed electrician in accordance with applicable local electrical codes.

DANGER

ENSURE POWER SOURCE

MATCHES VOLTAGE IDENTIFIED

ON APPLIANCE RATING TAG.

DANGER

To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/ NFPA No. 70. In Canada, all electrical connections are to be made in accordance with CSA C22.1, Canadian Electrical Code Part 1 or local codes.

ELECTRICAL

VOLTAGE	PHASE	CYCLE/HZ	AMPS
120	1	60	7.5

9' (2743mm) cord with plug included: NEMA 5-15P

MN-28664 • Rev 2 (06/13) • ASC-4G Gas Convection Oven - Manual Control • 8